Outer Limits 4x4 Board

Hi, Had the same problems, shaking around 70, after I passed the 70 it was gonne. Went to Bob J Tmart at Bondi Junction, never again, couldn't go over 60. Today I went to Chalmers tyres, they told me they have some special method to balance big tyres, they are using some kinda stud. Haven't done ...

there is a roof console for sale on ebay, if anyone is interested
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... eName=WDVW

I don't think anyone knows what is wrong. Nick Mannelli had my GU in his hands and as I wrote before, I have changed everythink, new drag link, new busches, new wheel bearings, no caster plates but snake racing dropped radius arms and still have that problem. But I have to say it was much worse ...

Hi, Was just reading the message board after a long time and came accross this post. Was having the same problem, started after fitting the RTC steering dumper. Changed everything, including swapping the caster plates for the new radius arms from snake racing. Got better I can still feel it around ...

The have duty RTC cost me A$300

I was lucky and had some spare time today so I went to 4Way suspension shop and took the dumper back. I was told it sounds like the shocker is not working correctly. They gonna pull it a part and check it. Let you know what they will find out.

Those dropped down radius arms from Snake racing so I could remove caster plates. It made 100% improvement but only with ARB dumper. If the RTC are too agresive on self centering is there a way to adjust them? Wanted to go today to "4way suspension" shop where I bought them and talk to them but I'm ...

Hi Maybe some remember me from post before. I had a big problem with shimmy on my GU. To solve it I had change wheel bearing, install new rock rod - drag link, changed bushes on panhard rod and still had the problem. As soon as the shimming started I had to slow down to stop it. Last idea was to ...

Thx ozy1, that is what I needed to hear. If the drop boxes has fixed the problem that means the dropped down arms should do the same. Cannot return the parts and ask for refund. I was told that to find the problem I have to fix first the bearings and steering arms because they were in bad condition ...

Same here, up till now it cost me $1500 plus $300 for the dumper and still have the problem

Ok, I just got the car back from Mannell motors. The shimming is there since the 5" lift was installed. I could feel it but it always stopped straight away and there was no problem to drive in speeds like 110km. Because I was not happy with it I decided to spent some money and bought RTC steering ...

I'm still having trouble with shimming on my GU. I found out that I have a pretty big free play on steering wheel, could the shimming be caused by that? How much of free play should be on steering wheel? I have played around with the adjusting screw on the top of the steering box and if I tighten it ...

Hi guys, I'm having the same problem. I'm running 5inch lift on 315/75R16. I tought it is the dumper so replaced it with RTC one but it got worse and had to put the old one back. It usually does it around 70 - 80km/h. I took the car to Mannell motors. Since then I had replaced front wheel bearings ...

they are aftermarket ones ( front and rear ), included in the 5in lift kit

As I could post only 2 pics I'm adding the 3rd one and pic of my GU as well

thx from your pictures I can not see the bracket and that is why I asked if you cut it off. I'm posting another pictures with my old dumper back on again and you can see the bracket on panhard rod, it is just past the kink. If I fit the dumper your way, I don't think I can clear the panhard rod ...

thx for those pics.
If I can see good from your pic, you cut of the bracket for dumper on panhard rod?

ok, thx a lot
after consultation with guys from 4way susp the way I have fitted it is correct. I was looking at your way of fitting, but I don't think I'm gonna clear the kink on my panhard rod. The dumper is just too long. Also I think the existing mount on panhard rod would be in the way.

Hi, thx for reply. Yes it is the one with white coil-over. There are two sizes, small one which should fit on the existing brackets and HD one which is a lot bigger. I bought the HD. I already talk to guys from 4way suspension and Nick Mannell and they think there has to be some other problem. I ...

Hi I just bought new 4way return to center steering dumper for my GU. I'm having trouble with fitting. I can not use existing mounts (dumper is too big) I have fiited it the other way around according to one picture I could find in Australian 4WD but the vibrations are bigger then before. Not sure ...

Thx all for help. As I was trying to find out more about this problem I asked in a few shops. I was told the springs should fit but they didn't recomended. The spring were designed for Ford and not Patrol and the weight of those two cars is different.

But isnt 20mm a bit to much? And why the factory ones are the same lenght?

Was told the 2" lift from Ford Maverick 93 TD42 will fit on mine 98 Patrol TD28. The left and right front spring from the lift are different, left one is shorter about 20mm. The factory springs on mine Patrol are the same lenght. Will it really fit or the axle on Maverick is different? Thanks for ...