Outer Limits 4x4 Board

hey guys, just wondering are all 1.3l tail shafts the same size?, i know the they are differnt to the 1L??

thanks for all the help guy, i decided to take a plunge and roll start it and drive to work, it got there fine and started up fine when i finished, so hopefully the problem fixed itself, but i will go over the fuel tank thing and blow throught the fuel lines... im still a bit puzzled on the doors ...

i dont get it... why would a dinted fuel tank effect wether the car is getting fuel or not?

hey guys, yeah i tried an impact driver, did not work, kinda stumped, dont have a welder so yeah, thinking about grinding of the bolts or drilling them and getting new bolts, and with the fuel problem, i clutch started it down the hill, seems to be alright when i do that, but if you leave it running ...

cheers Mike, yeah i am going to give the impact driver ago, i have already passed the stage of cursing at my doors... didnt help too much. yeah we with the engine, i put fuel in the carby and seems to start up fine then once its gone it just dies, so i am guessing its not getting fuel through?

thanks nik, it seems to be that the screws in the hinge are really rusted, any ideas on how the get them out... and yeah i did find a wire disconected on the coil, but it still does the same thing...

okay, i found a wire disconected from the dizzy, i attatched back and it started up fine, then it died like 20 seceonds later, and now it is doing the exactly same thing as before??

hey guys, i have just finished my body lift on my new suzi, i have to problems now, one is that i cant shut my doors?? the door is not to hight for the latch? not too sure how that works.. and secondly i cant start the car anymore, the starter motor seems to engage fine, and i dont think there is a ...

Hey guys, well i just bought my new suzi last week a 1994 WT Sierra (and i will definatley not be chopping this into a ute..) anyways i was just wondering... i have dont a three inch body lift on it and am running 31 BF Goodrich MTs... i dont have much room before i get rub, i was wondering wether i ...

do you think way would be easy to find at a wrecker, and what is involved it making one of these blow through box?? are they hard to make??

any ideas on what i could do with the carbie??

Hi all, on my last 4wd trip out to city view, i got hung up on a rock in the creek, resulting me in bending something on my transfer case, i not too sure what is because i dont know too much about them, and now my handbrake dosnt work... it feels much more tighter now and dosnt pull up as far, and ...

Are you talking CB60 or CB70/80 engines? Three cylinder 993cc turbo. I've had a CB70 before (EFI twin cam turbo) and they're a potent engine with lots of potential. Mine was making 75kW @ wheels in a Charade. The CB60 is only a carby single cam engine- don't waste your time. ;) hey mate, i am ...

will this also work for the 1.0L

do you think i will need to do anything to the internals??

I have come accross a dihatsu turbo recently does any know if it would be allright for my 1.0L suzzy???

Even if the copper finds 10 defects it is still only one fine. Driving a defective vehicle. but.. they usually stop looking after 1 or 2. IF they find more than 2 things wrong you can bet they will send you to a Transport inpsection station. You don't want that as those guys ARE experts and will ...

Even if the copper finds 10 defects it is still only one fine. Driving a defective vehicle. but.. they usually stop looking after 1 or 2. IF they find more than 2 things wrong you can bet they will send you to a Transport inpsection station. You don't want that as those guys ARE experts and will ...

if you get defected on more than one thing, would you lose more points?? or would you just get the single point for having a defected vehicle??

so do you reckon i will have to get a engineers for my ute chop, it says that the car was origanly released as a two seater any ways, will that matter or not???

hey all, i was wondering, i have just done a ute chop on my 84 suzi, ive got 2 inch body lift, 2 inch springs, and some offset rims, If i get pulled over dose anyone no what i am going to get defected on, i am getting an engineers done for the Ute Chop.....hopefully but yeah just wanting some sorta ...

Yeah i have seen the ones for the 1.3 and the 1.6 but not for the 1.0.........

hey all, i am new to this site, i have had my suzi for a while now, but i did a ute chop, diffiantly took longer than i expected, i can say now that i am sick of welding and cutting, and i am deffiantly sick of Bog, but i am happy with the way my suzi came out, i dont know how legal it is though but ...

Hey they everyone, i am new to this site, i was wondering how i would go about turbocharging or supercharging my 84 1000cc Zook?? would it be very hard???