Outer Limits 4x4 Board

You guys on this site are such nazi's to some people.. :x clearly the guy is from greece and doesnt speak/type english well, so be more understanding. Its good for the site that people outside of Australia are contributing (as best they can), so dont make them feel unwanted by jumping on their backs ...

^^ +1

let me know if you want the ROLL bar im selling

yep , they'll fit nicey. i have 235/75 tyre on rims like that and they stick out the flares about 1.5". looks good

looks like the OP is running the gabriel hilux/commodore shocks?

i have a single hoop rollbar that i need to sell. i brought it for my hardtop but it doesnt fit in it. will suit soft top. its really heavy and well made. about 2.5-3" dia steel piping . can get exact specs if your interested.

if your after a wheelbearing kit:

"WBK3101 were listed for the rear of my 90mdl WT. i fitted them up, spot on."

does it come in a men's version??

my sierra pulled stonermq's LWB MQ patrol with 32s out of mud. he's saved my ass a couple of times though...

sounds like the line going from the compressor housing to the wastegate is cut/split so your car is boosting to atmospheric pressure. Dont drive the car like this. dont let the boost build above what it was tuned to (5psi). Anything over that can blow your motor if you dont have the right air ...

thanks for the tip stoner MQ!!

I ordered a CPC cap from repco and it fit fine. locks too. the only problem is the rubber seal doesnt seal too well.

there is a seller on ebay that is selling them too.

my drivers seat, bolt closest to the door has done that too!. i put big washers on either side, but i really need to weld it and fix it properly i think..

yep. thats what im running my spare on (235/75/15)

castrol vmx80 and some nulon G70 gear/diff oil additive may help you out.

if yours is a 90mdl then its a sJ70 (no such thing as an st70 :) ) Easiest way to tell when i spot a sierra on the road, is looking at the wheel arch flares. The widetrack ones are body coloured and about 4"? wide, the narrow track flares are little black rubber ones, about 1" wide. the widetracks ...

welchy - your exhaust in your other vid sounds wicked!!

nice tyres too btw.

if i had a vid to add i would. still on my mate's camera. my suzi getting some air! all 4 wheels about 2-3ft off the ground

Sorry for digging up an old topic, but better than starting a-new I'm currently in the middle of close to a total rebuild of my rear diff... I've picked up some bearings from repco and it doesnt look right, and i just want to confirm before i return them or if i have the wrong idea, they have the ...

hey suzukiboy. i'd probably wreck the vit. put the motor in your NT, sell off the tyres, susp etc.

Doubt it would go as well offroad as your sierra.

double post

thanks for posting them

the 4th part is a good watch! 1-3 are good aswell.

i want one of the those grills with the yellow foglights mounted into them. has anyone ever tried to cut their grill and flush mount driving lights like that?

Are there any advantages to running a shock upside down?

daily drive mine.

90mdl hardtop g13ba, 235/75/15 muddies with stock gearing, open diffs.

i ran them with no lift for awhile. just need to trim the front bumper brackets. i trimmed them and moved the standard tin bumper about 20mm forward. most people seem to cut them right off, but i wanted to refit the stock bar and i needed it to be roadworthy.

i daily drive my stock 1.3 sierra with 235/75s. on road its not too bad. freeways are annoying. have to use 4th on big hills, but im in 5th 95% of the time. a sierra in general doesnt sit at 100 that easily anyway.. offroad i NEVER use 4H. 1st gear 4L doesnt crawl that well either, which is not the ...

Gwagensteve is right about everything. i just did the same thing to my rear. (submerged it.stuck for 2.5hrs). i changed the oil about 1 week later (1week too late if you ask me) and it made it marginally quieter. the oil was brown and looked like a choc milkshake. its now july and my diff is soo bad ...

1.8, are you talking about the 7AFE motor?

if so, it will be nearly exactly the same as fitting a 4age (1.6), which has been done plenty of times. read up on the swap. you will most likely have to run the corolla g/box (t50) and make mounts/setup the efi etc. its alot of work.

Want33s - more airflow. id doubt the head and manifold are flowing at 100% duty when the 1.3 carb is feeding it. Thanks Joe :) Is there a specific type/year of vitara carb i need to look for, or is there just one type? And does anyone on here have one for sale?! willing to give it ago, as i figure i ...

thanks for your input

Anyone else??

If you JUST had it rebuilt and this is one of your first drives, then some oil blow by would be normal. but if you have 1000+kms on the motor and it has done this, then i'd say the rings havnt bedded in properly.