Outer Limits 4x4 Board

thanks my earths arnt the best i need to fix all of them up a touch i think. but yea anyway went out there tonight and cranked it and wouldnt you know it, it started... so the car started and i finaly got some sence out of it and error code 14 come up which is the ECT sensor and yea had a good look ...

ive just trimmed the stuff that i didnt need out of each of the looms. i had a copy of a wiring diagram from PJ.Zook i think it was.

ive been trying to find the codes and pins to do a diagnos but havent had much luck

yea fuel pump should be fine, when ever its cranking you can smell the fuel and also when i pull the plugs out it is wet. so as far as i can tell the fuel pump is good

hi hows it going, well i got my car back from the exhaust joint yesterday and thought id try and start my car with the new engine but it doesnt like starting, itjust keeps cranking and has a little flutter as if it wants to start but then nothing.

i thought i would pull the spark plug out to check ...

no worries, thanks heaps for your help.. i dare say that your new schematic will come in very handy.

thanks alot for that, ill let you know how handy it becomes

hows it going guys and girls, im currently doing a baleno engine conversion in my sierra but just need a rough idea on how much of the wiring loom has to actually come out. ive got it half out and just not to sure if the rest of it has to come.

maybe some pics of the wiring loom that others have ...

ok no worries that should be ok ill sort myself out now.

thanks joeblow

aww this is a new one to me again. do you run one joeblow? or does anyone else?

hows it going, im just about to start a baleno conversion for my sierra and can remember reading somewhere that the jimny's had a sump that would suit the baleno motor and would clear the crank angle sensor (CAS).

my question is, does anyone know if this is true or just a misguided post?

if so ...

yea they would help with the castor issue.

when i was looking at lifting my coily i got onto alan johnson from piranah offroad in melbourne, an he had plenty of ideas. he was talking about custom springs an struts an a couple of dropped radius bars.

this was a while ago now but might be worth a ...

no worries thanks for that i might ring around tomorrow and see what sort of dollars and time ill be down

hows it going, well on the weekend we had a fair bit of rain so i took me sierra out and had some fun till i crushed my bearings in the rear diff and it looks as tho the diff is bent also. so im after some ideas on what to do wether it be get another sierra diff, fix this one or go something else ...

thanks mate ill spray them too, but there is power going right through the motor constantly so im guessing its shorting inside somewhere? could be rong but i cant see there being a need for constant power through the case or bracket of the motor

sweet over half price, still dear just to check if it is the actual motor tho, i think i might have to look into it a bit and see weather it is the motor or another problem coming from somewhere.

thanks guys

hows it going, so my wipers decided to only half work the other week and get stuck half way up. finaly i got sick of it on the weekend and pulled the motor out from behind the dash and now i cant find a replacement, just wondering are there any differences between the sj80 motors and the rest of the ...

speedy wheels did have an issue with there rims crackin around the hubs but as soon as that was brought to there attention it was fixed and faulty rims were replaced, and the balance has got more to do with the tyre then the rim unless its badly buckled, and even then for the rim to through the ...

well i got my flares today and they are actually bush wackers so if you like contact www.locktup4x4.com.au and they can get you some bushwackers

well the lady told me they werent actually bushwackers

try these. http://www.trailtough.com/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=119&category_id=15&option=com_virtuemart&Itemid=53

not exactly bushwackers but pretty similar. they have just got me a full set from the US and sent to me here in mildura (VIC) for $822.

just ...

sorry i ment what is the HIC as in whats it look like andis it attached to the carby?

mines doing the same thing, whats the HIC, is that on the carby. i just put a carby kit through mine and a new fuel filter, blew out all the fuel lines. the only thing i can think of now is a fuel pump

well actually i never asked what was the best option for me, im after what people think about there engines and engines that they know of

cost isnt really something im worring to much about, would love to do it for nothing but, when does anything cost nothing when dealing with cars.

i can get a GTI engine pretty cheap, and wouldnt be to much mucking around really, well i dont seem to think so yet anyway

i didnt forget about the ...

hows it going, iv been searching so before anyone says search is your best friend or hit the search button ill say iv been there.

im planning on doing an engine conversion was trying to get a gti engine but now im not sure if i should go bigger while im already mucking around.

so let me know what ...

i tried to organise something with bushwacker and they didnt want a bar of it. and that wasnt on ebay when i was looking which is a shame really.


doesnt matter now i have some comming, which sort of flares are the people having trouble with the eyelets?

his left me an email and said that he can get some sent from the US to perth then to me here in Mildura for $822inc. there not actually bush wackers tho, here is the link

http://www.trailtough.com/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=119&category_id=15&option=com ...

sweet thanks, i still havent herd back on an actual price yet so might even have to take up you up on that

thanks guys, ive contacted locktup 4x4 and there finding out an actual cost from the US for me.

Thanks guys.

im kind of set on the bushwackers, the others just look funny i reckon

hows it going, im just wondering where i can buy some bush wacker flares from, ive been searching and the only place i can find is bbm motorsport but they are currently out of stock and wont be getting any in for some while apparently.

any help would be great, Thanks