Outer Limits 4x4 Board

i run 31 x 10.5 mickey thompson baja claws. the day transport pulled me over i was running late for an x-ray and was annoyed that id be even later. they measure from the outer most point of my tyre (not the tread) and said that it was 90mm out from the guard. i then got pined for: oil leakage in rea...

Ha, your twisting my arm here.
But it's good to know.
There's a G16B on eBay for 450 at the moment,
300 freight to TAS I think.

Seems like less hassle and a few guys have put them in on here so ill just copy them.

Thanks Steve.
I know nothing about these motors and finding information on the net seems to be hard.
My current engine is dying and I need a replacement.

My list is either:
G13BB
M15A
GTI

Guess ill be crossing the M off the list then.
Thanks for all the help.

Thanks for the advice, I couldnt find anything on here about it and wanted to know how/easy hard it would be. So theres no chance the motor will bolt up to my sierra box? Does this mean, if I did couple the motor with a jimny box that I would have to modify the shaft from the gearbox to the transfer...

Has anyone put an m15a into a sierra? I'm looking at one which is very cheap but want to know if anyone has done the conversion?
Problems I would have etc...
Going into a 96 coily...

Hey, I've got a 96 coily w/ 2 inch body lift and am wanting to lift suspension. The front set up is BS and am wanting to go along the lines of having coil mounts on the diff, with the coils going into strut towers. My question is how do I (for 2 inch suspension lift) calculate how long the springs n...