Outer Limits 4x4 Board

Located in Hobart, Tasmania

Excellent Condition, goes well, regularly serviced.
Has Wide Body, good tyres, front bullbar and rear step.
Towbar.
5 speed, Power Steering, Power Windows, Power Mirrors.
12 months Registration (Tasmania)

ONLY 86,000 km's!!!!!!

Asking $11500 ono.

m - some ...

Looks great.
How do youthen lift the front and rear bumpers to match???
I am thinking of doing it to mine, but only if i can life the bumpers as well.

Did you take those photos through a special 'BLUR' filter??????

My camera has one too!!!!!

Mine has a straight thru exhaust with 2 hot dog mufflers.
its absolutely deafening, and has no acceleration whatsoever under about 3000rpm!!!

It was a backyarder job by the look of it.

If youre gonna do it, then i suggest do it properly, so that you actually get some gains from it, rather ...

its ok i should have read the service manual first......i found the values in that.
i have done plenty of tappets etc when replacing heads and rebuilding engines in the past, so I will do it myself this weekend and see how it goes.

Thanks for your help.

that is something i was thinking it might be.......if the tappet clearances are so far out,. would that affect the starting until tolerances close up a little???

can you tell me what the clearances should be for it?

the starting problem i thought may not be related, but when i first looked at and tested the car, it didnt do it, and it was very quiet.
the starting has gotten a little worse, as has the noise...

mine only has 81000kms. its a 92 feroza II sxp.

Just wondering how noisy your engines are???
Mine has quite a lot of noise when cold, and gets better as it warms up. it sounds like lifters rattling, similar to tappets not adjusted properly on older cars?
It also take a few cranks to start and idles rough for the first 5 seconds or so.
finally ...

Welcome.

There is a Russian site for the Feroza on the net, but I have lost the address for it.
It also had a complete PDF file of the Service Manual, all 400 or more pages of it, in Russian.
I saved it, printed it, then my computer crashed befoer I burnt it to CD, so I lost it.
At least I ...

Mine is in Hobart if anyone is interested.

Same deal virtually, cream color, brand new, comes with all accessories and plastic covers/clips etc.

$450ono also.

simon@ccamlr.org

if interested.

PS - Freight from Hobart would be MORE than from Adelaide to anywhere on Mainland australia I ...

is it that regular softtop do you mean??
if so, i have a brand new one for sale, going cheap. with all the brackets.
can supply photos for anyone interested.

email me

simon@ccamlr.org

it covers the car exactly where the hardtop goes. from the drivers head, over the rear rollbar to the ...

I have a brand new soft top for sale, with the framework and all plastic covers/clips etc.

I have never had it on my car since buying the car, but the details are basically as follows.

Cream in color, excellent condition top, no tears or marks that i can see.
Framework in excellent condition ...

My soft top canvas is brand new, only been on the car once, for fitting.
framework is also in excellent order and the plastic covers etc look spot on.
Considering I am in Tasmania, so postage my be a little dearer, i would be looking at about $400 for the lot.buyer pays postage.
If anyone is ...

Thanks for all the help.
I got mine working fine on the weekend.
the alarm module already had about 6 wires with the relays for the door locks. i ended up having to buy a single slave door actuator to put in the drivers door (about $9) and wired that one to the alarm. left the factory microswitch ...

i must admit, i do have to slam all the doors to get them to shut and seal properly.

it literally only does it for like 5 seconds though, i wouldnt have time to check that before it smoothed out and ran fine.

seems like its idling slow. if i feather the throttle it goes to about 2000rpm, still rough then smoothes out very quickly and idles just about 1000rpm.
once it warms up it idles about 800rpm.

i was thinking i should clean the injectors to see if that helps.
if it ever stops raining here, i ...

My feroza is a little rough to start when cold. i think its only in wet weather, as i only bought it last night and it hasnt stopped raining yet.
when you turn the key it tries ti kick into life immediately, then coughs a little and you have to keep the key turned on the starter for a few more ...

My hardtop has one small leak on the passenger side, at the top corner water is running in slowly and dripping onto the floor just behind the passenger seat. im gonna take a look this weekend and see if i can do anything about it.

$550 complete?
ok. as i said, i had no idea what they were worth, i was just going by what I was told they were worth..
mine has the framework and all the plastic clips/covers etc in excellent condition.

so i wil need the kit that i have got, in order to install a solenoid in the drivers door anyways.
thanks, now all i gotta work out is the dodgy wiring diagram for the alarm, to figure how it integrates with the locking!!!

Thanks

to be honest, Ive not looked at it really.
it comes with a large foldable framework that attaches on the rear section, as well as some plastic covers for where the fibreglass rear attaches, so you arent left with open holes in the top of the bodywork.

seems like they are going for around $500 ...

My 92 feroza Sxp has central lokcing for the 2 front doors, but i cant find any reference to it in the manual. can anyone tell me i this would eb a standard fitting?
I am about to install an alarm, and i bought a central locking kit with it, so I could have keyless entry, but now i dont think i ...

i thought of that but i have never liked soft top cars at all, and i dont really have any good dry space at home to store it, where it wont get damp and rot or damaged.
i would rather get rid of it to a good home. cos I really cant see myself going to the trouble to remove the fibreglass top to put ...

i was told by the guy i bought the car from that it was about $1100 to have made. im gonna check with some of the makers around Hobart and see what it would cost.
That may give me an idea of its worth.

then I could SELL it to you!!!!

I have a brand new Cream colored vinyl top for a 1992 Feroza (and i guess any other models that it fits).
It is complete with all brackets and plastics to install instead of the fibreglass rear.
I am thinking of selling it, but have no idea what it would be worth as it came with my car when i ...

Thanks for the welcome and the help.
i am amazed now that the 2 vehicles I own, which are both 'unique', therefore have a strong user following have great forums!!
Though I must admit, the other vehicle (an RGV250 motorbike) I helped create the forums myself!!!!!!!!

One thing I DO remember seeing was a new red wire in the engine bay runing from the battery direct thru the firewall to the interior somewhere.
Perhaps this is it?
If not, then I will run one from there with a fuse anyways.

Thanks again for your help.

Thanks. it does have a non factory tape player, that works with the igntion key, so I am hopeful that it will already have a 12V supply there.
Will let you know if I need any assistance with it tomorrow.
Thanks for your help.

Brilliant!! That was just what I needed.
I take it our wiring is the same as the GB version, and the color arent different??

My Feroza is in very good nick, so much so in fact, that I was VERY dubious about buying it as it was waay too cheap( over $3000 cheaper than any others I found in ...