Outer Limits 4x4 Board

Im not too sure because I never tried the 33s without the bodylift but id probly say they would scrub on the inside back of the guard. Depending on wat sort of tray youve got on youll find theyll hit the tray on flex as well without lifting it up.

Im running 33" Bfg muddies on 10" rims on mine (96 S/cab) with torsion bars wound up, 2" body lift and lifted the tray to allow for flex without scrubbing, but I plan to run 35s with a small guard chop real soon

has any one done this conversion? I've got a worked rb20det in a silvia thats making 450hp at wheels. I want to put it into a gq swb patrrol with the rb30 in it. just wanted to no if it would be worth it or whether it would be a good motor for 4wding.

My 4jb1 which is the 2.8 turbo diesel takes 5.5 litres

Ive got all the plumbing done, i decided to go 2" piping rather than 3" like i was initially going to use because theres not a lot of room under the bonet. I havnt got the intercooler mounted because im still waiting for two silicone bends to come in. Pics on the way hopefully next couple days

Has anyone put a front mount intercooler on a 2.8 yet. Ive just got my intercooler and just thought id see if anyone has already done it and maybe see a few pics.
It all looks pretty strait forward, the only drama will be the radiator support as it is right in the middle of the space.

Cheers in ...

Sorry to hi jack your thread but im having a bit of drama with the boys in blue in regards to running 33s on my rodeo. If i was to fill the form out and take the car with the 33s on to get inspected and they didnt approve it, can they issue a fine on the spot.
Cheers Ryan

I changed my standard wheel nuts to chrome mag nuts, but thats about as far as id go

Hi all.
Just wondering if anyone has done a higher lift on a rodeo other than just winding up the standard torsion bars?
Note this is the first IFS car ive had, i usually play with solid axle.
I have standard springs in the back and the torsion bars wound right up, 45mm body lift, and run 33s with ...

Mate ive got a 45mm body lift in my 96 deo.
All that i had to do was cut a little bit out ouf the plastic shroud that goes arond the gear stick in the cab because the gear stick wouldnt go back far enough to be able to get 2nd,4th and reverse, the only other thing is that you have to either lift the ...

Hi all ive got a 97 rodeo in need of some new ball joints. I can do the top one on each sid but to do the bottom one you have to actually pull the cv out to get the ball joint out.
My question is to get the hub out there is 6 ellen key screws probly 8mm ellen key size but i cant get them undone, i ...

As T_diesel said a 305/70/ 16 is as close as your going to get. Thats what i run at the moment but i have a set of 33/12.5/15s as well, and side by side the 16 is slightly bigger, not by much thou (like 5-10mm higher)

NAH RUN GEMINI WHEELS BRO