Outer Limits 4x4 Board

Fronius!!!!!! The only way to fly

What to do ? The ccda require rego and an internal cage for you to race in timed events however vicroads /rta will not allow a cage no longer :bad-words: . I spoke with a ccda official on this matter and he was not sure on the deails as yet. I asked if an exo cage could be made acceptable to the ...

Yes apparently its true. I spoke with vass engineer 2 weeks ago he said that as of 20th of may they are completely illegal can not engineer them anymore only vehicles that have been engineered prior to this date will be accepted he also went on to say that he feels he wont have a job in five years ...

Roadrunner offroad call troy 0458 508 793

what sort of tray are you building? is it a comp rig? if it s just a weekender or tourer why not just bolt crossmembers on top of the body mounts then run the main runners ontop 1m apart then tray crossmembers on the mainrunners and side combings build the tray from there . thats how all the ...

im about to order a 4speed atlas ive been told by suplier in the states that i would have to wait till mid oct for it to be ready. thats the 4 speed dont know what the lead time is on a 2 spd . im goin to go 3.8:1 in the main housing and then with the standard 2.72:1 in the planetary will also give ...

i run bfg km2s 33 /10.5r15 on my daily driver paid $1100 for the set fitted and balanced 18 months ago and got a free blackmax aircompressor they have promotions on once a year shop around . happy with the tyres not bad in the mud good on road not too noisy and ive done 70,000kms on em and counting!

im about to order a 4speed atlas ive been told by suplier in the states that i would have to wait till mid oct for it to be ready. thats the 4 speed dont know what the lead time is on a 2 spd . im goin to go 3.8:1 in the main housing and then with the standard 2.72:1 in the planetary will also give ...

i have the jd2 model 32 pricey but well worth it .the cheap benders are ok till you want to bend thin wall tube or if you want to bend 180 deg shock hoops depends on your application and how much you will use it .fabrication is my job so it made sense to me to spend the extra coin and get something ...

Try Ecad they have an office in hallam somewhere had them come round to look at my project before i started the build they were pretty helpful and have a list of fixed prices for the different mods you want engineered contact details Ecad 03 8682 9936 0403 367 396 0418 551 331 1/33 Rimfire drive ...

I suppose the application should be checked frist before offering opinions but really if the application was that structurally significant then (A) it's probably not pertinent to be asking a 4wd forum (no offence to the expert welders on here, pretty avatar or not) (B) I think the designer would be ...

did i miss something here :?: what you are all saying is that it is quite acceptable to weld stainless steel to mild steel using a mig with mild steel wire :!: and on top of that no one has even asked the application for which they are being welded. Yes i agree the tig methods discussed would be ...

wouldnt dream of using mild steel wire in a mig to weld stainless to mild steel :shock: ,if you dont believe me try it ,then put what you have welded in a vise and give it a good whack with a hammer and see what happens . there is absolutely no strength using this method and dont let anyone tell ya ...

why not investigate a water to air intercooler setup?

Just make up a rack that slides in to your towbar toungue hole and the bike sits nice on the back you can still see ya taillights its quick easy ,i made mine in about 2 hrs and have since made one for a mate every one comments on it .its compact and saves lugging round a trailer and you can change ...