Outer Limits 4x4 Board

is there any available to fit a 85 petrol (22r)? tried the obvious ones rockhopper, marks, etc but no luck.

I know a lot of cars dont have this... i only got mine done last year..
something to think about..

A battery mechanical isolation switch for the battery that provides power to the engine, ignition and fuel pump shall be securely mounted within easy reach of each member of the Crew and this switch ...

has anyone got any experiances with the arb fridge ( current model) ?

hey piglet where can i find some specs, photo, dimentions, etc on the evakool's your selling? i was on the evakool site and they only have details for fiberglass models ( rfe 47 & 60 ff look the goods) or the fridgemate range. would they have them at seven hills tjm?

just checked out bushman site and amazed that you NEED 2 x AA batterys to run thermostat and digital display on top of 12v supply, can't run fridge without them. wtf ???? have enough problems with kids toys running out of batteries. think i'll pass on the bushman....

cheers for info guys.
will mostly be for long weekends away but looking to get a few long trips in, like the cape mid next year.
will be also using an icebox for longer trips as we always seem to eat and drink every thing we take away.
dj_hansen, why only fridge models? i will be checking out ...

looking to buy a compressor fridge / freezer , looking for 50l min as have 3 kids and 2 adults to feed and prob 80l max. leaning towards waeco 50l duel zone (47l with dividers in) anyone got one? any good? is there any others around 50l worth a look for around same coin? can pick 1 up with a bag ...

hey athol, only after the centre mount for the 2nd row, i have seen the 3rd row point on passenger side .
where is the shaped plate and nut welded? is it the kind of 'c' type channel around 100mm approx from back of 2nd row seats that the row of plastic lugs that join the roof liner together and ...

talked to another fitting station today. can fit 3 points to roof crossmember at rear near barn doors. the left and right have a hole already, but the middle one has to have a hole drilled and a plate inserted with a bolt welded to it and pop riveted in. a small hole in the trim also has to be cut ...

talked to another fitting station today. can fit 3 points to roof crossmember at rear near barn doors. the left and right have a hole already, but the middle one has to have a hole drilled and a plate inserted with a bolt welded to it and pop riveted in. a small hole in the trim also has to be cut ...

the crab bar mounts under side windows - if you look there is a square removeable panel. it is behind where the seats fold up, not gonna leave them down permantly and probley get knocked back on rego even with foam. gonna find out more on roof mount.

its the seat that is the prob not the floor.the strap would slip between the seats and crush the child and seat in a bad accident. like the idea of fitting in roof rather than crab bar, but can't figure out where the centre point is ? thinking maybe a of type of load leaveling strap between left and ...

so shaun i'll just send the extra kiddies over to you on the next trip eh..

i've got a family and its getting bigger. well will be bigger by monday,hopefully.

found 2 of 3 in roof near barn doors. where is the middle one? the section in the middle steps in for the barn doors latch and there is only a small hole for the plastic plugs that hold in the roof lining, definatly not strong enough for a restraint..

thanx for the link bogged. but i can't check out the photos even after i joined up?

will only be kiddies gettin in the back anyway, but just seeing if there are any other options.

your correct, the third is on the passenger side near rear door. I want to fit 3 across the 2nd row of seats though.

Was looking to fit a 3rd child seat to my GU patrol wagon and realised there is nowhere to mount the anchor point in the middle. ( 2nd row). Have had a chat to child restraint station who explained seat is not engineered to take a restraint in the centre and also is where the 2 seats meet ( 50/50 ...

Was looking to fit a 3rd child seat to my wagon and realised there is nowhere to mount the anchor point in the middle. ( 2nd row). Have had a chat to child restraint station who explained seat is not engineered to take a restraint in the centre and also is where the 2 seats meet ( 50/50 split) so ...

i have the 65mm springs with tough dog shocks. so far so good but ride is a bit stiff. good luck with castor bushes i couldn't find any, but if u do let me know supplier.

which bushes did u get? not original rubber ones i'm guessing.

if your looking for more height dobinsons also have 60mm front, 65mm rear springs as well. they were the tallest i could without using 80 series coils.

GO THE BUNDY. looked better and higher live though

thanx tlcc had a great first time willowglen (driving that is). thanx budda for not driving the mud, i got runner up in touring is there any truth in the rumor that there will not be a touring class next year ???

x2 except for the clunk and bang. i can't hear mine make any noise from inside the cab, but have been told it clicks as it unlocks when i make sharp turns.

just realized why 3 different prices for panhard rod bushes. there are 3 seperate bushes on each rod. 2 on the lower panhard to diff end and 1 on top panhard to chassis end.

great to see some first hand experiance being shared with the auto lockers. i also have a lockrite fitted to the front of my bundy and love it. yes the steering wont respond the same if you keep on the gas, but if you back off a bit it does release. its also good not having to worry if you air ...

where did you get 6 radius arm bushes? a bundera (swb coil springs) has 16 bushes in radius arms. you have the 2 bigger ones on the arm to diff end and 2 smaller ons on arm to chassis end, x 2 for front and the same for the rear. from kingswood toyota was quoted $104 each for the larger diff to arm ...

hey paul any tips on spares to take for a bundy? got a cv and rear tailshaft that i hope i won' need.

hey guys and gals i will be havin my first crack at willowglen this year in a bundy i hav had a couple of months with bugger all wheel time. if i can keep the bundy off its side i'll be happy, still not used to a shorty but damn there fun can't wait only 6 more sleeps to go.