Outer Limits 4x4 Board

Mines up and running now, just got home!
Awesome quality too...

Is the live stream working yet? Of still down due to weather...

Minimum 12" link separation I believe...

dirty minded people, love it, I was thinking much the same thing first time I saw this picture!

Thanks for all the replies guys, much appreciated. I've sourced a diff spreader I can use at my disposal now so I will go that way purely due to the ease of it all, removal and install!

I've got a ford dana 60 unit bearing front diff and a rear sterling 10.5" diff. Stripping them down to build up. New centres, lockers and master install kit... Need to remove the centre out of them both and looking for tips from people who have done it all before? The ways it has been done, special ...

Also what classes there open to would be good info too...

I know it's a long time away yet but will toperi be running again next year?

Yea copy that, sounds like the single piston calipers won't be bad at all than, I plan on my rig being light as possible. Like you said they were designed to stop a pretty heavy truck!

So with the cnc gear, that's everything all in one unit? Res, pedal and master cylinder... (Not sure if the cylinder part is correct)...

Yea the ford diff I have is the unit bearing style... Matt Medows got his high steer done by RDG Engineering, which ill probably get the same as he has all the drawings and knows what needs to be done! Anyway back to the brakes topic/thread, what pedal and res do you/should you use or just go a cnc ...

Yea copy that, I've decided to just go with some factory replacements, there only single piston calipers but will do for what I want at the moment. Later on when/if I have more ponies and speed ill upgrade to the dual piston willwoods...

I have a comodore booster here I was going to use (1 1/8" bore I believe) but have about pedal and resiviour?
Or is it best to just go a cnc/willwood setup?

I know it's not really 'welding' but what's a good plasma cutter out there?

Just ordered the above setup, wait and see the quality, but will be a while till its in use!

A tuff truck style rig, using dana 60 front and sterling 10.5 rear...

How do you work out what what brake booster, pedal etc etc is needed?

Anyone got a link for the handbrake above?

There is a local supplier from Victoria that sells new calipers with pads and brackets, ready to bolt up and for all 4 corners he will do 900 bucks.
I just thought that the trd calipers might of been another avenue...

Anyone else have any info or comments?

Got a front dana 60 and rear sterling 10.5 off a 2003 f250, for a build I am doing. Needs new brakes and I've got a set of TRD Aurion calipers, same as Corvette C5 fronts and C4 Rears. Just wondering weather these would work, fit with standard rotors and wouldn't be too difficult to make brackets ...

Is this a hand brake setup that tuff truck or CCDA will approve and be happy with?

Which is?
Can you explain a little more?

so the guage do you hook it up to the turbo itself or what??

only asking cause ive been told you can get one where a sensor is in the exhaust and tells the the gas temp.

But i want the turbo one lol..

only asking the question cause i got a 07 turbo diesel and me and a mate pushed it pretty hard the other week doing some hill and rock work, at the end of arvo it was running pretty hot as we could see the heat comming out of the bonnet breather and would of been nice to know how hot it was running...

so this pryometer checks the exhaust gas temperature right?

Is there a guage that you can get hooked up to the turbo to get the temp of it straight off?

i am thinking the greenpeace guys might have bit more to say about it than whats been said on this thread lol

the thing is every second person seems to say a different brand is shit!

every brand someone has something negative to say about it....

DAMKIA: i knew i was never going to get a magical answer with someone telling me a bad that blows everything else out of the water. I always knew there is no best basically no matter what you buy, all i was looking for was some advise and opinions on different brands for people that have used the ...

okay than, well you tell me a brand of suspension that your never heard a bad comment about and i will go straight out and but that one than??

thanks for speaking so highly of my rig!!