Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Search found 35 matches
- Thu Jul 14, 2011 4:22 pm
- Forum: Cruiser / Prado
- Topic: LED tail lights for 93 cab/chassis
- Replies: 2
- Views: 195
Re: LED tail lights for 93 cab/chassis
Thanks for the web site, most helpful. Cheers
- Wed Jul 13, 2011 5:56 pm
- Forum: Cruiser / Prado
- Topic: LED tail lights for 93 cab/chassis
- Replies: 2
- Views: 195
LED tail lights for 93 cab/chassis
I would like to replace the rear tal lights with LED's. Can someone help me with a dealer etc to purchase them. Cheers
- Wed Jul 13, 2011 5:53 pm
- Forum: Cruiser / Prado
- Topic: Seating in 93 cab/ chassis
- Replies: 7
- Views: 358
Re: Seating in 93 cab/ chassis
Thanks guys you have given me a few options to go with. Cheers
- Sat Jul 09, 2011 6:41 pm
- Forum: Cruiser / Prado
- Topic: Seating in 93 cab/ chassis
- Replies: 7
- Views: 358
Re: Seating in 93 cab/ chassis
do the surf seats have the sme bolt holes or need to drill new ones ?
- Sat Jul 09, 2011 5:40 am
- Forum: Cruiser / Prado
- Topic: Seating in 93 cab/ chassis
- Replies: 7
- Views: 358
Seating in 93 cab/ chassis
The seats in my ute have finally lost the cushioning. Before I pay to re upholster them I was wondering if there is another seat combo that would fit. Some say commodore seats bolt in but was after more positive advice. Cheers
- Mon Jun 20, 2011 1:09 pm
- Forum: Cruiser / Prado
- Topic: oil leak under dash
- Replies: 4
- Views: 265
Re: oil leak under dash
93, 75 series.
doesnt drip on the foot but is all over the plastic heater duct next to clutch
doesnt drip on the foot but is all over the plastic heater duct next to clutch
- Sun Jun 19, 2011 7:03 am
- Forum: Cruiser / Prado
- Topic: oil leak under dash
- Replies: 4
- Views: 265
oil leak under dash
had to relocate some wireing near clutch pedal. When I looked underneath near the clutch pedal theres oil over the wireing. Where would it be coming from?
- Tue Jun 14, 2011 4:05 pm
- Forum: Cruiser / Prado
- Topic: Transfer Case Seal
- Replies: 7
- Views: 327
Re: Transfer Case Seal
Thanks 4 the advice. Will tackle it in a couple of weeks. Cheers
- Sun Jun 12, 2011 4:32 pm
- Forum: Cruiser / Prado
- Topic: Transfer Case Seal
- Replies: 7
- Views: 327
Re: Transfer Case Seal
So by splitting the case this would mean buying the full seal kit with bearings and seals, yes?
- Sat Jun 11, 2011 3:58 pm
- Forum: Cruiser / Prado
- Topic: Transfer Case Seal
- Replies: 7
- Views: 327
Re: Transfer Case Seal
93 model
- Sat Jun 11, 2011 8:03 am
- Forum: Cruiser / Prado
- Topic: Transfer Case Seal
- Replies: 7
- Views: 327
Transfer Case Seal
Transfer case is leaking from case to front diff. Is this hard to replace by myself and what is the best way to attack it? Cheers
- Sat Jun 11, 2011 7:57 am
- Forum: Cruiser / Prado
- Topic: Fuel Guage 75 Series
- Replies: 4
- Views: 322
Re: Fuel Guage 75 Series
The tank is standard (under cab.) undid the sender but couldnt work out how to remove. wire harness didnt seem to want to come off.
- Mon May 09, 2011 4:42 pm
- Forum: Cruiser / Prado
- Topic: Fuel Guage 75 Series
- Replies: 4
- Views: 322
Fuel Guage 75 Series
When the tank is on enpty and I fill it, it takes nearly 20 kms for the guage to start to register. Is this the guage or the sender? Cheers
- Tue May 03, 2011 7:08 pm
- Forum: Cruiser / Prado
- Topic: Injector pump 1HZ
- Replies: 2
- Views: 244
Re: Injector pump 1HZ
thank you for the advice, will look into it more and let you know what i find. Cheers
- Sun May 01, 2011 11:18 am
- Forum: Cruiser / Prado
- Topic: Injector pump 1HZ
- Replies: 2
- Views: 244
Injector pump 1HZ
When putting the foot down it gets to a point and wont go any harder but when i back the throttle off a bit it picks up more revs. Pump overhaul ??. Cheers guyd for any help
- Sat Apr 30, 2011 7:37 pm
- Forum: Cruiser / Prado
- Topic: Turbo on 1HZ
- Replies: 10
- Views: 637
Re: Turbo on 1HZ
Thanks guys, you have given me plenty to go on. Will look at gearbox and find out which one it is and then take from there. Thanks heaps. Cheers
- Mon Apr 25, 2011 5:44 pm
- Forum: Cruiser / Prado
- Topic: Turbo on 1HZ
- Replies: 10
- Views: 637
Re: Turbo on 1HZ
Thanks guys. Will do a bit more research but i might tell my mate to have another drink haha. Cheers
- Mon Apr 25, 2011 7:45 am
- Forum: Cruiser / Prado
- Topic: Turbo on 1HZ
- Replies: 10
- Views: 637
Turbo on 1HZ
I have been thinking of putting a turbo on my 1HZ. A friend has told me that by doing so, the it will blow the output shaft on the gearbox as it was not designed for a turbo. Is this a myth or fact. Also, the mufflers have started to deteriorate so was thinking of replacing whole system. Was also to...
- Thu Apr 21, 2011 3:08 pm
- Forum: Cruiser / Prado
- Topic: Diff ratios
- Replies: 9
- Views: 507
Re: Diff ratios
Have had the ol girl out to 125, but shes revving
- Wed Apr 20, 2011 5:44 pm
- Forum: Cruiser / Prado
- Topic: Diff ratios
- Replies: 9
- Views: 507
Re: Diff ratios
Both 1HZ models
- Sat Apr 16, 2011 7:49 pm
- Forum: Cruiser / Prado
- Topic: Diff ratios
- Replies: 9
- Views: 507
Re: Diff ratios
Thanks guys. not sure what hes running either but will askk at next meet. It is at indicated KPH. Dont trust GPS readings
- Sat Apr 09, 2011 7:34 am
- Forum: Cruiser / Prado
- Topic: Diff ratios
- Replies: 9
- Views: 507
Diff ratios
Can someone help me. My 75 series originaly had 31 x 10.5 tyres on it and was revving its arse off. I changed the tyres to 33 x 12.5 x 15. Not revving as hard but at 100 km/h it still revs at 2400 rpm. My mate has the same size tyres and his revs at 1800rpm. Is it the diff ratios?. If so how do i fi...
- Wed Mar 09, 2011 8:32 am
- Forum: Cruiser / Prado
- Topic: 1HZ Poor fuel economy
- Replies: 11
- Views: 827
Re: 1HZ Poor fuel economy
Had similar problem with my hzj75. Changed the filter and used a bottle of wynns diesel conditioner in a full tank of fuel straight after. Fuel ecconomy picked up considerably. If you use the additive every 2nd tank it will benifit the injectors as well as your fuel pump. You can use it in every tan...
- Sun Mar 06, 2011 2:34 pm
- Forum: Cruiser / Prado
- Topic: Secondary Fuel Filter
- Replies: 3
- Views: 229
Re: Secondary Fuel Filter
I think thats what the previous owner has done. the mounting brackets are there but the filter has been removed for the secondary filter.
- Sat Mar 05, 2011 11:53 am
- Forum: Cruiser / Prado
- Topic: Secondary Fuel Filter
- Replies: 3
- Views: 229
Secondary Fuel Filter
Looking at the workshop manual, it says that the 1HZ has a secondary fuel filter. Mine doesnt. I have an 93 75 series. Is it needed or not? If it is, is there much to installing one?
Kenny
Kenny
- Sat Feb 26, 2011 5:53 am
- Forum: Cruiser / Prado
- Topic: Rear Main Seal
- Replies: 3
- Views: 191
Re: Rear Main Seal
Ok thanks guys will attack it next weekend. Thanks
- Thu Feb 24, 2011 5:25 pm
- Forum: Cruiser / Prado
- Topic: Rear Main Seal
- Replies: 3
- Views: 191
Rear Main Seal
Hi guys, My rear main seal on 75 series is leaking quite bad. Can this be done easily or pain in the butt job? Also, should I replace the clutch when I do it?
- Wed Feb 23, 2011 2:13 pm
- Forum: Cruiser / Prado
- Topic: Fuel Tank
- Replies: 0
- Views: 109
Fuel Tank
Can anyone tell me if the 75 series came out with a standard 75 litre tank. I thought they all came out with 90 litre
- Wed Feb 23, 2011 1:48 pm
- Forum: Cruiser / Prado
- Topic: Driving Lights
- Replies: 2
- Views: 311
Re: Driving Lights
Thanks heaps. Will do
Kenny
Kenny
- Sat Feb 19, 2011 7:46 am
- Forum: Cruiser / Prado
- Topic: Driving Lights
- Replies: 2
- Views: 311
Driving Lights
Thanks for the tips guys, I now have lights. The only question now is they work off the switch ok, how do I get them to work off the dipper switch?