Outer Limits 4x4 Board

Yea me too

https://www.oemmitsubishiparts.com/part ... am=6280550" onclick="window.open(this.href);return false;

Alot of the Delica's had the oil pump/cooler/filter setup in a different place to the Pajero so I know a Pajero engine cannot go into a Delica but not sure about the other way around. The parts can be made to swap but you really need both engines there to know where to drill the extra holes into the ...

Another update, Managed to source some rear trailing arm bushes from the US of A, landed here were half the price as buying them here. I didn't want nolathane due to performance issues (harshness/stiffnesss/robustness etc) and pretty rapt with the service. The old ones were completley stuffed with ...

Yep, the rear suspension is standard at this stage! I'll just see how it goes and run from there. They are standard SWB coil springs!!! With all the weight gone it it sitting pretty high, the front mounts on the rear trailing mounts are a donut and don't like be lifted much, the more you lift a Paj ...

Yes I have thought about not making it legal but I want to be able to put it on the road. Rego $300 ish, Insurance $500 ish, WOF $100. So not really big costs in the scheme of things compared to having to trailer it. Many of our trips involve road driving too.

Got a short video here....

http://www.youtube.com/watch?v=-yRYMMB6xjM" onclick="window.open(this.href);return false;

Is it the flux capacitor?

Have you been giving it a hard time with the locker in? I shore all the teeth of my factory locker when giving it a bit of jandal a few years ago and replaced with with another one and now have gone air leaker (and yes, it is true to name). I would put another factory one in but not be as violent on ...

You can just renew the output piece where the slipjoint is, thats what I did. Made it out of brass - solid as a rock now.

Mistubishi only sell the output housing complete and $NZ738 + GST

Nup...

DId you have a look here... http://www.outerlimits4x4.com/viewtopic.php?f=4&t=34204" onclick="window.open(this.href);return false; Its written as NH body lift. There is plenty on body lifts and it is straight forward, just do a bit of reading etc, theauto lever is no problem as it is cable operated ...

My latest purchase.

2.3 Turbo, runs like a dream!!! Cost me a 24 pack & had factory PTO winch.


And my other 3...!!!

Hooked the steering up and bled the brakes and made an exhaust. Drove it out of the shed :D But I have a misfire, so have taken the inlet manifold chamber off to get the fuel injectors to get them cleaned. Hopefully thats what it is. http://img.photobucket.com/albums/v90/glen_nz/IMG_6442.jpg http ...

3.5 Manual on 4.9 Diffs and 33's - I get about 12 on a long trip (all open road) and more often 13 to 16 (around town with a little off road maybe), off road only 20+

Glad to hear its going so well.

I did too look!

Its just me hitting "Ctrl C" after I type a message so that if it freezes I don't loose what I have written, must have got a Ctrl V in there in the meantime!!!

Whats a repeater problem???

SO I pulled the sump.... All good still, no filings at all, actually it was nice and clean, but the oil level sensor plastic bit had gone brittle and was sitting in the sump http://img.photobucket.com/albums/v90/glen_nz/Big%20Black/IMG_5609.jpg Finally found the injector pump timing mark... http ...

Does that mean I can assemble the pin and everything with the throwout bearing before I put it back in and then it'll just 'snap' into place?

Good to hear!

Been pretty quiet in here........ My latest project, A NZ new wagon. Pretty rare with a manual trans, being NZ new it has factory diff lock and manual fuel pump. Its a 1998 NL model. Got it, it was filthy inside, so much dust and it has been run out of water. SO hot the top tank on the radiator was ...

Put some silicon spray on the tracks and it is much better, will see how long it lasts. Bit of a pain to do, I pulled all the trim off and the rubber out of its tracks to get a good coverage.

Anyone else sick of having slow electric windows?

Passenger side one the worst on both my pajero's. Real slow for first 10 inches then its away. Fine coming down.

Can you get rubber grease?

Oh yeah? Work ok? I thought about it but thats as far as I got.....

Another vid... http://www.youtube.com/watch?v=Hhq6S9x3CvQ&feature=player_embedded#" onclick="window.open(this.href);return false;! So after a bit of underwater winching etc, and a bit more abuse at local events the winch just stopped, no lead or anything, just stopped. Not a solinoid issue. Pulled ...

http://www.youtube.com/watch?v=lJRGy5_Ljgs

http://www.youtube.com/watch?v=PtRG9KL3PYk

unplug the headunit and see if the dash lights still work...

Did you wire up a headlight wire to the stereo for the dimmer?

Do your park lights still work?

What about your taillights...?

Have you checked the FUSES?????

From 5 years ago

http://www.youtube.com/watch?v=MI-K8ER_oTs" onclick="window.open(this.href);return false;

FINALLY! I drove it out of the shed..... Still no exhaust so noisy as fark but soon sort that.... Couple more pic's http://img.photobucket.com/albums/v90/glen_nz/Project%20Chop/IMG_4573.jpg http://img.photobucket.com/albums/v90/glen_nz/Project%20Chop/IMG_4574-1.jpg http://img.photobucket.com/albums ...