Outer Limits 4x4 Board

take it beck to holden and ask them to do an injector solenoid cut off test and an injector balance test. the injector recalls have been known to be faulty. this should only take no longer than half an hr. we have had 3 come back thru our workshop. if the injectors are ok then go looking at the ...

well that kills that idea...
thanks guys... looks like ill be taking the pajero instead..

Can i ask the one question that EVERYONE will ask you in disbelief..... ____________WHY??________________ because ive killed the 1.3 AGAIN and wanted to take the yuki (my sierra)away for christmas i dont have time to rebuild the 1.3 so i thought maybe a quick swap and i could still take it away ...

hi guys ive doe a search and couldnt find any direct answers...

ive got a 1l and want to put it where the 1.3 is atm... is it a straight forward job or a big hassle??

any help would be great.

thanks

my guess is the front gearbox bearing cause mine does the same thing even after replacing the throw out bearing.

thanks guys. the oil sender unit is all good so ive ripped the sump off and its definately the bigend bearings. but its an easy fix cause it all looks good in there so ill just replace them and give it back to him.

im working on a 88 model charade. i know its not a 4x4 but it what my cousins bought. he was driving at 100km/h and the oil light came on for a split second and there was a ticking noise coming from the engine. its still there but only under revs. the oil and water are fine, no smoke, no overheating ...

i had this problem. after rebuilding the carby twice, new filters, and fuel lines i ended up having water in the fuel. (lots of it but thats another story.) it looked like some-one had cracked an egg in it. might pay to check your tank.

i've got some pics of my carby (91model) if u want i could host them and let you know where they are. ive just had to rebuild mine twice. and once proffessionally (i kept getting water in the tank source now paying the price :twisted: ) if you havent already done it that is. if u havent already ...

TOOL??? Hahahahahahahahaha, I've taken it off and put it on again more times than I can remember without any special tool. A punch and hammer works every time whilst being careful not to damage the nut. Also is you use a plumbers wrench, also called a Stiltzen (spelling unsure) you'll find that you ...

thanks MUD4B now the fun begins.

and to 87suzi i'll try and keep track of what i did and how easy it was for you that way u can give it a go your self.
its gotta be easier than rebuilding 6 or an 8 surely.

i had the same prob in a commy had to replace the ecu even checking voltages and replacing wires didn't work. hope it works out betta 4 u tho

1.3lt engines ovalise the bore...... they have to be bored out way too far and are uneconomical to rebuild all i've done is break the oil ring in number 4 cyclinder b4 that it was running like a dream. the motor m putting in is better then my old one but if it can be rebuilt for under the going ...

i'm putting a new motor im my yuki and wanted to rebuild the old one. was tld that the 1.3's don't like to be rebuilt. is this so???? if so what do i do with the old one????

It could be the detent spring in the transfer. There is a spring loaded ball that keeps the high-low shift fork in position on top of the transfer, kept in place by a hex plug just to the left (passenger's side) of the high-low shift lever. Remove this plug and the spring, the ball will likely stay ...

skootin wrote:Does this truck H4 push button on the dash.

no it doesn't its all on the floor with levers. its a fj75 swb

hiluxv8 wrote:

low40 wrote:had a body lift

Thats what i was thinking,body lift does it every time.

no it doesn't have a body lift , nor are the engine mounts broken even the detent plate is in perfect nick. guess i'll have to put it in to get fixed. thanks for the help tho.

thanks i'll check them on friday.

I have an 85 cruiser swb 3f motor 5speed that keeps spitting out low 4. does any one have any ideas of what could be causing this and how do i fix it??? im in the bris area.