Hi All
I have been given an option on my truck to put a 3" exhaust,modify the inj pump and increase boost to 16psi.
My question, is this safe to do with an older engine with a few kms? Vehicle is in excellent nic but don't want to overdo it.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Mods on a GU 4.2 TD
Your mods are fine, but boost is a little high, 12-14 psi from a stock turbo is adequate. As long as the person knows what they are doing, keeps tabs on egt's while tuning, all will be good.
Hope this helps.
Andy
Hope this helps.
Andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Who is online
Users browsing this forum: No registered users and 1 guest