Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 Series Sliders

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1315
Joined: Wed Aug 17, 2005 6:24 pm
Location: Spring Mountain, Greenbank.

80 Series Sliders

Post by brooksy »

Just a quick question with regards to 80 Series Landcruiser chassis.......

Are all 80 series chassis the same??? I ask as I have a customer who wants a set of 80 series sliders but have heard from someone else that not all chassis are the same, so I just want to confirm this before starting the job.

I have only done 1 set of 80 series sliders before and just wanted to know if my drawing would suit all 80 series Landcruisers. (Ignoring the obvious body lift issues & diesel exhaust that run outside the chassis on drivers side).

brooksy.
C44F-Custom 4x4 Fabrications
0400 443 802
brooksy72@live.com.au
Top
Posts: 1719
Joined: Sun Jan 25, 2004 11:45 am
Location: Brisbane

Contact:
Contact RV80

Post by RV80 »

Im sure that all the chassis's are the same except for the engine mounts which are in different spots between petrol and diesel... And twin cam petrols have the exhaust on the outside of the rail too, not sure about the 3F ones though....
Top
Posts: 115
Joined: Fri Apr 22, 2005 8:38 pm

Post by 4runner2.8 »

diesels have the exhaust on the oustside too.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest