does anyone know where i can get a floor console like this one in australia or something similar that can be locked?
http://cgi.ebay.com/ebaymotors/ws/eBayI ... 892&rd=1,1
thanks clint
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
where to get floor console?
Moderators: toaddog, Elmo, DUDELUX
go buy a sheet of 5ply or MDF and make your own. Just do a cardboard cut out to make sure you got the right shape.
Glue and scew or you you could use a brad gun to put it together.... pad it with some foam from clark rubber... and if your missus is good on the sewing machine, get her to make some covering up for it. If not, just take the whole thing to an upholsterer and they'll do a perfect job on it.
As said by Ruff though, just make sure you put a decent latching system in it or you will have a headache after a rollover...
Glue and scew or you you could use a brad gun to put it together.... pad it with some foam from clark rubber... and if your missus is good on the sewing machine, get her to make some covering up for it. If not, just take the whole thing to an upholsterer and they'll do a perfect job on it.
As said by Ruff though, just make sure you put a decent latching system in it or you will have a headache after a rollover...
When in doubt..... UTE-ERIZE it!!!
Who is online
Users browsing this forum: No registered users and 0 guests