Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Body and Spring lift

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 53
Joined: Fri Dec 01, 2006 11:00 am
Location: Wangaratta, Vic

Body and Spring lift

Post by rustynuts »

Can anyone help me, I'm looking at lifting my Mid Wheel Base cruiser. At the moment I have a two inch lift but I believe that it is not enough to fit 35's under. The rear springs are 75mm above standard. The front are stuffed due to a launch that shouldnt have happend. :x

Q's :1) Are 50mm blocks worth putting under or what size would you guys recommend (50mm to high?)?

2)What type are best polly or aluminium or does it matter?

3)Where can I get decent springs in victoria not arb, tjm havnt had to much luck with those.

4)Will a two inch lift and 50mm body lift allow me to have the clearence that I require.

Cheers
GQ patrol coil cab/chasis tray
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests