Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

changing power steering hose

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 400
Joined: Thu Jun 24, 2004 8:56 pm
Location: Wakerley, Brisbane

changing power steering hose

Post by 86MUD »

Hi all

Just split a power steering hose. Any tricks to replacing it?

I was just going to remove the old one and get pirtek to make me a new one. Do I have to bleed the system once I reinstall the new hose?

Cheers

Andrew
Top
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Contact:
Contact cloughy

Post by cloughy »

Fill resevoir, preferably with front diff on jack stands, work steering wheel left to right, top up fluid accordingly and roberts your aunt's lover :D
Wanted: Car trailer or beaver tail truck, let me know what you got
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Take the hose with as they will most likely need to reuse your fittings, i had a leaking flared pipe end at the pump and pirtek made it so i could replace just a small section if it happened again.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 400
Joined: Thu Jun 24, 2004 8:56 pm
Location: Wakerley, Brisbane

Post by 86MUD »

Thanks all...

Took hose off this morning...it has a really small pin prick hole in the middle of the hose...the fluid must be under a fair amount of pressure as the amount of fluid that has escaped has made a huge mess underneath my car.

Thanks for your help

Andrew
Top
Posts: 400
Joined: Thu Jun 24, 2004 8:56 pm
Location: Wakerley, Brisbane

Post by 86MUD »

Is $120 too much to pay for a power steering hose? Does anyone know what a genuine one costs?

I picked up my new power steering hose from Pirtek this morning...looks nice

Cheers

Andrew
Top
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Contact:
Contact cloughy

Post by cloughy »

86MUD wrote:Is $120 too much to pay for a power steering hose? Does anyone know what a genuine one costs?

I picked up my new power steering hose from Pirtek this morning...looks nice

Cheers

Andrew
Little high but OK, hydraulic shite is scarily expensive
Wanted: Car trailer or beaver tail truck, let me know what you got
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Thats what it cost me 2 years ago.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 8 guests