Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hybrid power steering plumbing

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Hybrid power steering plumbing

Post by Slunnie »

I have an LC60 PAS box and a RoverV8 pump on a project.

Any ideas that are not me making bits on how you would go about plumbing them together or go about getting the bits made to plumb them together? I'm not a business, and so assume that Pirtech won't drop in for a coldie. Sydney based also.

Thanks for any assistance.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 707
Joined: Fri Jul 22, 2005 10:03 pm
Location: ipswich

Post by jugger »

there would be other smaller hydro workshops aroud . i could tell u of a place but there in ipswich QLD so i dont think they would come that far but ive seen them do car work for ppl before.
ya got2 b tuff if u gunna b dumb!!
Top
Posts: 1644
Joined: Thu Aug 03, 2006 9:50 pm
Location: Hawkesbury, Sydney

Post by CWBYUP »

Measure the length of line needed
Take digi photo of the set up in car
Get old pipes.

Take all to pirtek / enzed and say I want this.

Thats what i did last time and the bloke was great.
Droped in there again last week because i needed a brass piece for my compressor, gave it to me cause he wasnt sure if it would work or not.

Cheers
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

Ahhh, excellent. Thanks for this fellas. :D
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 1308
Joined: Tue Sep 23, 2003 10:17 pm
Location: BADFABING

Post by turbo gu »

try a company called kwik fix . they have a mobile service. based at brookvale but go all over sydney.
GU 42td wagon for touring
GU ute for the fun stuff
http://www.allterrain4wd.org.au/
Top
Posts: 3685
Joined: Sat Sep 27, 2003 8:38 am
Location: Sydney

Contact:
Contact Roctoy

Post by Roctoy »

turbo gu wrote:try a company called kwik fix . they have a mobile service. based at brookvale but go all over sydney.
It's Kwik Fit, there was a service guy nemed Stewart that did the power steer hoses on my lux, he was a 4wd nut.

Mobile based Sydney, highly recommended.

Pirtek sux bum!
Outers & Arms up stickers coming soon you hungry bitches!

http://www.myultimate4wd.com
GRIMACE wrote:How I miss the days of care free wheelin with the crews!
Top
Posts: 1308
Joined: Tue Sep 23, 2003 10:17 pm
Location: BADFABING

Post by turbo gu »

Roctoy Designfab wrote:
turbo gu wrote:try a company called kwik fix . they have a mobile service. based at brookvale but go all over sydney.
It's Kwik Fit, there was a service guy nemed Stewart that did the power steer hoses on my lux, he was a 4wd nut.

Mobile based Sydney, highly recommended.

Pirtek sux bum!
just checked and stu's company name is Kwik Fix based at brookvale but is mobile.
GU 42td wagon for touring
GU ute for the fun stuff
http://www.allterrain4wd.org.au/
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests