Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Suspension - RV6 Prado

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 2
Joined: Thu Jan 25, 2007 10:58 am
Location: Sydney

Suspension - RV6 Prado

Post by 4WD Pom »

Dear All

After some advice and ideas. I'm in the process of buying a '98 RV6 Prado. The previous owner has recently put in new springs (standard height) and shocks (XGS at the rear, standard at the front). Now I was wondering about putting XGS at the front and also some new springs. If I put in some new springs to go for a lift (say 50mm) will I need to change the shocks or will they cope with it? Also, do I even need to change the front shocks or should I leave them (as they are pretty new) and just replace them when they die?

Also, whats the largest size tyre you can fit without a body lift? Not looking to do anything to serious but some long treks through Oz.

Cheers Will
Top
Posts: 93
Joined: Mon Jul 12, 2004 9:24 pm
Location: western district

Post by jaspers joint »

You will need to change front struts if you want to lift it 50mm.
As for tyres i'm not sure i run 285/75/16 but thats on a gxl prado
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 5 guests