Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

NP Pajero Mods

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 1385
Joined: Wed Jan 29, 2003 9:49 pm
Location: Tweed Coast

Contact:
Contact rocknferoza

NP Pajero Mods

Post by rocknferoza »

A mate of mine has just bought a 2005 GLS Did manual pajero.

He is looking at putting a lift kit in.
Is there a 4 inch lift kit still avaliable for them and who makes it :?:

He also wants to put a 3 inch exhaust right through and possibly chip it.
Would the 3inch be a good size for the Did and what is a good chip for them :?:

Thanx
James
James
94 cxi feroza- coiled rear!!! SOLD !!!!!
05 s/cab 5L-e hilux- bring on the mods
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

4 inch lift, only if you import it from Japan.

I don't think many have put a 3" exhaust in a DiD Pajero, but I think Cranky Cruiser has put a 3" in his new Triton - try searching.

I don't know about chips.
Top
Posts: 2
Joined: Fri Jan 19, 2007 3:15 am
Location: US fo A

Post by Monstero »

I wouldnt put 3" on it. I would just remove the exhaust and resonator and that will improve on what he wants.I kept the 2.5" and I am happy with the results on my NP. Saw 2mpg increase in fuel mileage as well. I think if he went to 3" it would not have enough back pressure and he would loose what he is trying to gain. Just my .o2
03 NP
33" Pro Comp Xterrain,
7"Pro Comp Motorsport Lights
Diff/Transfer Gas Tank Skid plates, Breather tubes on Diffs/Transfer cases,
Brush Guard,OME 2" HD Suspension.MM9000 Winch w/syn rope
Top
Posts: 1107
Joined: Wed Jul 20, 2005 6:44 pm
Location: Melbourne

Post by hudson44 »

Monstero wrote: I think if he went to 3" it would not have enough back pressure and he would loose what he is trying to gain.
It doesn't need back pressure. It has a turbo.
Top
Posts: 2
Joined: Fri Jan 19, 2007 3:15 am
Location: US fo A

Post by Monstero »

Doooohh....didnt see the Did....thats what you get for skim reading....I Take back my last statement ;)
03 NP
33" Pro Comp Xterrain,
7"Pro Comp Motorsport Lights
Diff/Transfer Gas Tank Skid plates, Breather tubes on Diffs/Transfer cases,
Brush Guard,OME 2" HD Suspension.MM9000 Winch w/syn rope
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 0 guests