Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rebuild kit for a 1.3l donk

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 16
Joined: Sat Dec 02, 2006 10:20 am
Location: Melbourne-East

Rebuild kit for a 1.3l donk

Post by cohunas »

I've pulled the engine out and after hunting around to find a good 1.3l engine second hand i've come up with nothing...so i think i'll have a go at rebuilding this one.
Can you guys advise where i can get a rebuild kit from and a rough idea on what one should cost?
Any other tips for rebuilding it would also be appreciated.

I'm thinking i'll give the block and crank to speedworks and get them machined, but should i get the pistons/kit first so they can bore the engine to suit?
Top
Posts: 287
Joined: Wed Feb 15, 2006 7:00 pm
Location: Perth, WA

Post by smiley_smoke »

what state are you in? there are plenty of engines around.. put a wanted ad in as well taht should help.
2" Susp lift, Ext shackles, RTC damper; Offsets, Custom interior panels, Stereo (+Sub), rubber Checkerplate floor, Custom Centre console, Under bonnet storage
Soon: Aircon + tinting?
Top
Posts: 16
Joined: Sat Dec 02, 2006 10:20 am
Location: Melbourne-East

Post by cohunas »

oops, just updated my profile smiley, I'm in Melbourne.
Ive looked around at a few just most have been rooted, i'll give the wanted section a go though - thanks.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 0 guests