Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Gearbox shifter bolt size?

Tech Talk for Suzuki owners.

Moderators: sierrajim, lay80n

Forum rules
Post Reply
Posts: 287
Joined: Wed Feb 15, 2006 7:00 pm
Location: Perth, WA

Gearbox shifter bolt size?

Post by smiley_smoke »

Anyone know what size shifter bolt the 86 NT 5spd uses? 10 or 12mm?
they are only 6.60 each but i rather not spend the extra if i dont need to :D
2" Susp lift, Ext shackles, RTC damper; Offsets, Custom interior panels, Stereo (+Sub), rubber Checkerplate floor, Custom Centre console, Under bonnet storage
Soon: Aircon + tinting?
Top
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Shifter bolt size.

Post by want33s »

I replaced the bolt and bush in my shifter yesterday. mine is 89 WT and uses a 12mm head bolt with a 5 x 1.0 thread. I found a bolt that fits beautifully in my bolt bucket. I think yours will be 10mm head. If you remove the shifter housing from the box, you could tap and fit whatever bolt you like(as long as the end is ground down).
Top
Posts: 287
Joined: Wed Feb 15, 2006 7:00 pm
Location: Perth, WA

Post by smiley_smoke »

ah nice one.
yeh i will be dropping out the box tomorrow to rebuild it and figured i will replace the mounts, seals and shifter bushes/bolts whilst i am there..
thanks for the info mate.
2" Susp lift, Ext shackles, RTC damper; Offsets, Custom interior panels, Stereo (+Sub), rubber Checkerplate floor, Custom Centre console, Under bonnet storage
Soon: Aircon + tinting?
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 3 guests