Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Flares for lux

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 281
Joined: Sat Dec 20, 2003 5:45 pm
Location: Gold Coast - Pac Pines

Flares for lux

Post by Bowhunter »

Currently the rubber I'm running sits outside the width of my guards.

I have black plastic/rubber flare type guards (home jobs) mounted to "legalise" it.

I am not to convinced (from what I've heard) that the Transport boys/coppers would view them favourably and ticket me anyways.

I'm wondering if there are any form of aftermarket "bushwacker" type flares that are available for Lux's. :?

Are the Bushwacker ones (Jeeps aren't they) compatible with a Lux?

cheers,

Luke :cool:

PS I'm assuming this would make the wider track legal by mounting these type of flares.
[url=http://www.aussiebowhunter.com][b]Founder TBGA - September 29, 2001 - Australia's Premier Bowhunting Site[/b][/url]
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Best bet would be check out ARB and TJM they should have something to suit. What you have is fine but if there going to do you for something they'll find some BS way of doing it. By law i'm 90% sure you can't increase your track more than 37.5MM (1 1/2 inches) so if they get picky and measure it and it's over that your done anyway
plenty of parts on the bench
Posts: 317
Joined: Sun Jul 17, 2005 8:08 pm
Location: western australia

Post by crack »

have a look on ebay u can find some nice fiberglass black flares for about half the price they are at the shops...of use lastic garden edging
If all else fails, use a bigger hammer

hilux- locked lifted and turboed
Posts: 40
Joined: Wed Oct 04, 2006 11:12 pm
Location: sydney

Post by TOYTRUK »

HI BOWHUNTER,
i think track width is measured from the centre of your tires across the car,wider tires dont necessarily increase your track just your overall width.rim back spacing will change your track.
i.e. stock solid axle rims on an ifs model will increase the track.
that is my understanding.i may be wrong, hopefully someone can confirm this. i ordered a set of bushwacker flares from american custom truck in qld.they are the aussie importer.takes about 6 weeks if they are not in stock.my lux is an 85. check bushwackers site for others.hope that helps.
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

so tell us bit more about you rig say ln106 runnig ifs rear diff and spacers front or are your runnig 10" wide rim bit of info would be good
Last edited by Sic Lux on Sun Feb 11, 2007 9:31 am, edited 1 time in total.
plenty of parts on the bench
Posts: 442
Joined: Thu Nov 11, 2004 12:14 pm
Location: Boomba boys drive bodied rigs

Post by batcho101 »

autobahn sell a fibreglass flair to suit all hilux models and it is 2.5 inch wide well at least the ones that used to be on mine where
84lux-project. A-frame, 350 chev, turbo 350 auto, duals, rears up front, crossover, twin locked and a 118" wheelbase
Posts: 281
Joined: Sat Dec 20, 2003 5:45 pm
Location: Gold Coast - Pac Pines

Post by Bowhunter »

Cheers boys!

The legality I'm concerned with not complying to is having my tyres outside my guards, not so much the specific wheel track.

I'll look into those option, and put some pics up in the next few days of my Lux.

cheers,

Luke :cool:
[url=http://www.aussiebowhunter.com][b]Founder TBGA - September 29, 2001 - Australia's Premier Bowhunting Site[/b][/url]
Posts: 281
Joined: Sat Dec 20, 2003 5:45 pm
Location: Gold Coast - Pac Pines

Post by Bowhunter »

Here's a pic -

Image

The flares on there now are really quite stiff. Do they need to be softish so as to not harm pedestrians etc incase I hit one :twisted:

cheers,

Luke
[url=http://www.aussiebowhunter.com][b]Founder TBGA - September 29, 2001 - Australia's Premier Bowhunting Site[/b][/url]
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Looks ok from that angle perhaps a down the side shot would be best also i wouldn't worry about them being hard once they hit that bar i don't think they'll mind :D i'd say there softer than that
plenty of parts on the bench
Post Reply

Who is online

Users browsing this forum: No registered users and 64 guests