Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rochester Quadrajet question

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 398
Joined: Mon Jun 21, 2004 7:57 pm
Location: Berwick, Vic

Rochester Quadrajet question

Post by g35me »

Can anyone tell me where to put these 4 vacuum lines on a Rochester quadrajet? Also I would assume that the large one in the front is for fuel, what type of fitting do I need?

http://s102.photobucket.com/albums/m98/ ... =carby.jpg
Twin Turbo V8 80 Series Ute with Extra Bits
Top
Posts: 412
Joined: Fri Jul 14, 2006 6:03 pm
Location: brisbane

Post by rvh96 »

Image
'05 GU Patrol coil cab ST
6" lift
Tough dogs
Snake Racing drop arms
3rds Rear Arms
Twin ARB air lockers
37" trepadors
ARB bullbar
WARN winch
High flow turbo
3" mandrel bent exhaust
Top
Posts: 398
Joined: Mon Jun 21, 2004 7:57 pm
Location: Berwick, Vic

Post by g35me »

also there is a vacuum line above the one that says "vent to charcoal canister" where does that one go? And if I have removed the charcoal canister what do I do with those vacuum lines? Where does the vaccum to the brake booster go?
Twin Turbo V8 80 Series Ute with Extra Bits
Top
User avatar
DK
Posts: 527
Joined: Fri Oct 20, 2006 6:00 pm
Location: Melbourne

Post by DK »

Vaccum to the brake booster should come from the manifold not the carby..

Block the pcv if your manifold doesnt have the valve...it does nothing and is just pollution stuff.....Come to think of it my old holden v8 with a quaddy on it had lots of blocked pipes lol
3dr 110 H/Top,Swampers,Locked and Loaded
Top
Posts: 412
Joined: Fri Jul 14, 2006 6:03 pm
Location: brisbane

Post by rvh96 »

top one to air cleaner i think . if your not using a cansister just block the ports. holdens & chevs run the booster into the manifold there will be a 3/8 threaded hole between the carby and distributor for a vacum fitting
'05 GU Patrol coil cab ST
6" lift
Tough dogs
Snake Racing drop arms
3rds Rear Arms
Twin ARB air lockers
37" trepadors
ARB bullbar
WARN winch
High flow turbo
3" mandrel bent exhaust
Top
Posts: 412
Joined: Fri Jul 14, 2006 6:03 pm
Location: brisbane

Post by rvh96 »

pcv valve will be in one of the rocker covers do not block it of or the engine will be seriously fumey
'05 GU Patrol coil cab ST
6" lift
Tough dogs
Snake Racing drop arms
3rds Rear Arms
Twin ARB air lockers
37" trepadors
ARB bullbar
WARN winch
High flow turbo
3" mandrel bent exhaust
Top
Posts: 398
Joined: Mon Jun 21, 2004 7:57 pm
Location: Berwick, Vic

Post by g35me »

thanks guys that should sort it all out.
Twin Turbo V8 80 Series Ute with Extra Bits
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests