Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Flex ramp designs

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 146
Joined: Tue Oct 05, 2004 4:58 pm
Location: Sydney

Flex ramp designs

Post by Harrow »

Hey guys and gals,
I am looking for designs for flex ramps. I want to build my own and dont know any measurements for it e.g. angle of the ramp and length or ramp. I only want to make a small ramp but not to small. Any help would be awesome thanks!
2002 100 Series Cruiser 4.5L ULP
5 inch lift
Warn 9.5xp
315/75R16 Micky Thompson MTZ's
Custom bull bar

www.lukeys4x4.com

[u]AUSTRALIA LOVE IT OR LEAVE IT!![/u]
Top
Posts: 870
Joined: Sat Jun 03, 2006 5:32 pm
Location: sydney

Post by MART »

Made out of scrap,adjusts to whatever angle i want,gold pins come out to dissasemble,Cheers Paul.




Image


Image
BLOWNZUK 1.3 efi,sc14 supercharger,hilux diffs,detroit lockers,stage 4 rockhopper,6 point cage,35 muddies.
Top
Posts: 1477
Joined: Tue Mar 07, 2006 1:13 am
Location: The Gong

Contact:
Contact jimbo jones

Post by jimbo jones »

that zook looks tough do you have any more photo's?
Love the bar work who made it?
jimbo
current truck, 105 series GXL diesel 6" springs & twin pro lockers
sierra LWB spoa one wide track diffs twin locked

Sierra Parts Wanted pm me
Top
Posts: 159
Joined: Sun Mar 19, 2006 12:04 pm
Location: Kurrajong NSW

Post by rustys »

There is a full build up on that zook in the members section BLOWN ZOOK and Paul built it all him self not bad for a electrician. I mean the lot Paint and panel,trim,built the motor, tube work ,electricl not bad

Garth
Top
Posts: 146
Joined: Tue Oct 05, 2004 4:58 pm
Location: Sydney

Post by Harrow »

thanks dude for the pics nice zook and ramp. My plan is to make my ramp out of scrap angle i have at home.
2002 100 Series Cruiser 4.5L ULP
5 inch lift
Warn 9.5xp
315/75R16 Micky Thompson MTZ's
Custom bull bar

www.lukeys4x4.com

[u]AUSTRALIA LOVE IT OR LEAVE IT!![/u]
Top
Posts: 146
Joined: Tue Oct 05, 2004 4:58 pm
Location: Sydney

Post by Harrow »

Any one elce got any more info?
2002 100 Series Cruiser 4.5L ULP
5 inch lift
Warn 9.5xp
315/75R16 Micky Thompson MTZ's
Custom bull bar

www.lukeys4x4.com

[u]AUSTRALIA LOVE IT OR LEAVE IT!![/u]
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

what do you need to know. You get some angle iron or whatever. You then measure out the angle you want the ramp to be whether it is 20Ëš, 23Ëš or 30Ëš. Then build supports to make sure the whole thing doesn't fall down
Ransom note = demand + collage
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests