Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Where and what UHF antenna to buy

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Where and what UHF antenna to buy

Post by CRUSHU »

I am looking for a UHF antenna for my 4by, what sort do I buy, and where sells them at a good price in Vic?

I was suggested a 4.5db gain with spring base, for $95.

Is there better and a similar price?
www.CVEPerformance.com

Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Posts: 3073
Joined: Sun Jul 27, 2003 5:37 pm
Location: Mornington Peninsula, Victoria

Re: Where and what UHF antenna to buy

Post by bj42turbo »

CRUSHU wrote:I am looking for a UHF antenna for my 4by, what sort do I buy, and where sells them at a good price in Vic?

I was suggested a 4.5db gain with spring base, for $95.

Is there better and a similar price?

This is what i use, and have had the longest (broke all others)


BJ
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

my suggestion is to buy a good quality one at a reasonable price from a reputable company.

:D





or just buy a gnd independant from supercrap thaat has the coil steel whip
Posts: 1232
Joined: Sun Feb 29, 2004 11:37 pm
Location: Brisvagas

Post by Bad JuJu »

The more dB gain, the higher the angle of radiation.

This means if you are in hilly terrain then go for a higher gain.
If mostly flat, less gain.

A good compromise is 4.5dB.

Unless you are going to mountin the middle of a large pannel like the roof, then go Ground plane indipendant. Bullbar mounts are shitty for anything else.


I find the GME AE4018K1 Antenna a fantastic all-rounder
Posting quality not quantity!

Wanted: Stock HiLux Front Leaf Springs
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Post by CRUSHU »

Bad JuJu wrote:The more dB gain, the higher the angle of radiation.

This means if you are in hilly terrain then go for a higher gain.
If mostly flat, less gain.

A good compromise is 4.5dB.

Unless you are going to mountin the middle of a large pannel like the roof, then go Ground plane indipendant. Bullbar mounts are shitty for anything else.


I find the GME AE4018K1 Antenna a fantastic all-rounder
Is the spring at the bottom, or 1/2 way up??
www.CVEPerformance.com

Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Posts: 1253
Joined: Thu Dec 12, 2002 1:34 am
Location: QLD

Post by Jeeps »

The 4.5db with sprig base is pretty good.

I'd be going the RFI 6.5db elevated feed for $80. That aerial has probably the most punch of any uhf antenna on the market.
Posts: 389
Joined: Sun Feb 05, 2006 10:45 am
Location: nsw

Post by dai-hard »

i run a 6.5 db RFI on my work ute and a 6.5db fiberglass on my 4x4 and the RFI works heaps better using the same radio
Posts: 572
Joined: Thu Mar 31, 2005 10:17 pm
Location: Mooroolbark Vic

Post by Jaffa »

Bad JuJu wrote:The more dB gain, the higher the angle of radiation.

This means if you are in hilly terrain then go for a higher gain.
If mostly flat, less gain.
Other way around, High gain it a flatter radiation pattern, good for flat terrain and low gain is better for hills
Posts: 572
Joined: Thu Mar 31, 2005 10:17 pm
Location: Mooroolbark Vic

Post by Jaffa »

My Opinion, Polar Electronics make a brilliant aerial bout $120 4.5db Spring Base, Ground Independent, fiberglass whip, you can bend the whip right over on itself and it will not break, the GME AE4018K1 is the same as the polar, but the polar is (in my opinion) way better built, it has a longer ferrule in the bottom of the whip (which is where most fiberglass whips break) and a better quality spring and it the same price

My 2c
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

prestige communications in perth.. hard to beat.
Posts: 6
Joined: Tue Aug 22, 2006 9:05 am

Post by ol9fingers »

Can the UHF antenna be used as the am/fm antenna as well?
Posts: 377
Joined: Mon Mar 20, 2006 5:52 pm
Location: Geelong

Post by tj81 »

Another vote for Prestige Communications.

Go to their website...http://www.prestigecom.net.au/default.a ... 8UHF+CB%29

I have the DB6 Ground Independant, very very happy with it so far.
92 LWB Ford Maverick 4.2, Dual Fuel.

99 GU ST 4.2 Turbo Diesel, Non Intercooled, Tigerz11 w/synthetic, 35"' Bighorns, ARB Compressor, Snorkel.
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Post by CRUSHU »

I ended up going thru Telstat in Seaford, nice and local, very helpful, and got the GME AE4018K1 with all the cable, spring etc, and a stainless bull bar bracket, for $105.
www.CVEPerformance.com

Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Posts: 572
Joined: Thu Mar 31, 2005 10:17 pm
Location: Mooroolbark Vic

Post by Jaffa »

ol9fingers wrote:Can the UHF antenna be used as the am/fm antenna as well?
You can use anything as an antenna, some things work better than others though :D Im guessing you mean for a car stereo? You can use a UHF antenna if you wanted, you can get AM/FM antennas that look the same as a UHF or CB antenna if thats is what you are after.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests