Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Vacuum advance

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 97
Joined: Thu Feb 08, 2007 10:17 pm
Location: Perth

Vacuum advance

Post by bravo »

I replaced the vacuum advance on my fj73 3F engine, and theoredically it should run better with more power and more efficiency. I only took it for a short run but the power was definetly less.
The car has been tuned for the broken vac advance, so would replacing it with a working one cause it run worse? or have i got another problem?
FJ73 2inch lift climax shackles, 2inch body lift, 33 muddies
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Play with the timing a bit and see how that works just small movements each way till you find the sweet spot or if you have a light you can play with it more acurratly
plenty of parts on the bench
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests