Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Quieting Down Rock Hoppers

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 143
Joined: Tue Apr 18, 2006 9:54 pm
Location: Melbourne

Quieting Down Rock Hoppers

Post by Mud_Muncher »

I have series 3 in my Jimny that are very noisy. Is there any tricks to making them run a bit quieter at highway speeds, I cant here myself think! Thicker oil perhaps?

Thanks and regards,

Harley
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

How noisy is noisy?? Is it just noise, or are the bearings going.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Posts: 1046
Joined: Sun Dec 12, 2004 11:24 pm
Location: ACT

Post by Zute »

When I put my new gears in, I was amazed how much quieter the box was. I replaced all the bearings , so maybe that's whats needed with yours.
'2001 Disco td5
'90 Maruti Ute 1Ltr Lwb

Experience is something you don't get, until just after you need it.
Top
Posts: 5226
Joined: Sun Jul 27, 2003 2:03 pm
Location: Sydney

Contact:
Contact Squik

Post by Squik »

Did you have to cut a hole in your floor at all? I ended up putting an extra piece of carpet around the boot-hole and double sealing the boot. Seemed to improve things greatly.
DRS smells like a cat-food milkshake... and wet socks... and gorgonzola cheese... all whizzed up in a blender
Top
Posts: 870
Joined: Sat Jun 03, 2006 5:32 pm
Location: sydney

Post by MART »

I have a stage 4 gears fromm BBM and I had to grind case in 4 spots,quiet as a mouse with factory carpet,Cheers Paul.
BLOWNZUK 1.3 efi,sc14 supercharger,hilux diffs,detroit lockers,stage 4 rockhopper,6 point cage,35 muddies.
Top
Posts: 269
Joined: Thu May 06, 2004 2:51 pm
Location: Brisbane, Southside

Contact:
Contact suzukiboy

Post by suzukiboy »

Turn up your stereo. :armsup:

My Vit with rockhoppers is pretty quite just has a whine noise through the top gears.
Last edited by suzukiboy on Tue Feb 13, 2007 8:01 pm, edited 1 time in total.
Suzuki Vitara JX 1.6 EFI Hardtop.
Calmini Lift, Rockhopper, Skid Plates, ARB Airlocker, Bullbar, 30" MTR, Custom Sill Sliders, Rear Bar.
See my pics
http://community.webshots.com/user/suzukiboyoz
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

My S1 had a very slight whine to them. My calmini's also havea very slight whine (though atm the t-case has a noisey bearing :cry: ). I hardly noticed mine, and i have no interior or anything, just bare floor pan. See if you can compare yours to another. You may have a faulty bearing. How old are the gears, were the bearings replaced when you swaped gears. Remember that noise basically = wear. The more noise, the more wear so to speak.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

My first set of series one gears were noisy .. then the were really noisy ... then silent .. :roll: .. Then I was really noisy.. :bad-words:
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

they will make noise due to the way the gears are cut. Nothing much can be done to make them quieter, But you can make your cab quieter by using sound insulation products on the floor, firewall and doors to cut down on the noise entering the cab
Ransom note = demand + collage
Top
Posts: 143
Joined: Tue Apr 18, 2006 9:54 pm
Location: Melbourne

Post by Mud_Muncher »

Thanks all for your advice. I bought the car with the gears already in so I have nothing to compare it with. I have gone from a 3inch BL to a 1 inch, so the box is closer to the floor now so very noisy.

Then again it was quiet compared to my loose fan rattling and then the belt slipping off on the way to work :bad-words: . Good thing the boss doesnt turn up till 10-30 plenty time to fix in the company car park :cool: .
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 2 guests