Hi,
I have a nh swb pajero with 31x10.50 R15 tyres and want to upgrade to 285 75 16. the truck has a 4cm suspension lift. Should I install a body lift?
Thank you and regards.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Bigger tyres
Moderator: -Scott-
paj
firstly, awesome looking paj,
i dont really think youll need it, especially being a base model without the fiberglass flares.
mines the same, and only about a 40mm lift too, iv got 33" tyres, roughly the same size as a 285/75/16, and iv had up to a 33" JT2, actual size the same as most 35" tyres.
iv got no bodylift and never seen the need for one, iv got a set of ally blocks i had machined up at work, cos it was free bar, and everything else is there, and i just dont think i need it. Maybe if i had sliders and i could be bothered i might do it, but even then i think id get machined down again to about 30mm rather than 50mm that it is now,
in others words, get landcruiser offset rims and you wont need the bodylift
dean,
pic of mine,
i dont really think youll need it, especially being a base model without the fiberglass flares.
mines the same, and only about a 40mm lift too, iv got 33" tyres, roughly the same size as a 285/75/16, and iv had up to a 33" JT2, actual size the same as most 35" tyres.
iv got no bodylift and never seen the need for one, iv got a set of ally blocks i had machined up at work, cos it was free bar, and everything else is there, and i just dont think i need it. Maybe if i had sliders and i could be bothered i might do it, but even then i think id get machined down again to about 30mm rather than 50mm that it is now,
in others words, get landcruiser offset rims and you wont need the bodylift
dean,
pic of mine,
Tis interesting. It has a bonnet off a 2.8 on it. (the 2.5's didn't come with a bonnet scoop)
And the writing on the side indicates is a 2.5. I'd say it's had a lift of some description.
And the writing on the side indicates is a 2.5. I'd say it's had a lift of some description.
1994 NJ SWB, 3.5, 5 speed manual, 33's, XD9000, 4.9 diffs, Front & Rear ARB's, Safari Snorkel
2008-2009-2010-2011 Pavlova in the shed.
2008-2009-2010-2011 Pavlova in the shed.
bigger tires
hey i have a '96 montero thats basically stock, ive cranked the torsion bars an inch to get a little extra room up front, I currently have a set of 31/10.5/15 BFG A/Ts but need to get new tires soon. I really like the BFGs but i wanted to know if anyone thinks i could fit 32s on it.
thanks for your help
thanks for your help
unless its a j top like mineNJV6 wrote:Only the 2.8 has the body lift.
with all the other goodies too
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
Good day,
Here are a few pictures of my truck with the new tyres
http://i37.photobucket.com/albums/e62/t ... 0-16-3.jpg
http://i37.photobucket.com/albums/e62/t ... 0-16-2.jpg
http://i37.photobucket.com/albums/e62/t ... 0-16-1.jpg
http://i37.photobucket.com/albums/e62/t ... -10-16.jpg
Best regards
Here are a few pictures of my truck with the new tyres
http://i37.photobucket.com/albums/e62/t ... 0-16-3.jpg
http://i37.photobucket.com/albums/e62/t ... 0-16-2.jpg
http://i37.photobucket.com/albums/e62/t ... 0-16-1.jpg
http://i37.photobucket.com/albums/e62/t ... -10-16.jpg
Best regards
Who is online
Users browsing this forum: No registered users and 4 guests