Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
2.4 to 2.7
Moderators: toaddog, Elmo, DUDELUX
2.4 to 2.7
just wondering has any one done and whats involved
Now thats a TOWN.
2.4 desiel to a 2.7 3rz-fe
Just done a 3y to a 2.7 3rz-fe
You will need the
engine
bellhousing + shifter fork & throwout bearing
clutch
clutch slave + master cylinder
wiring harness off the motor
computer
fuel pump ( I used the complete fuel tank from a 2.7 lux, pump in tank)
2 30amp relays
extra wire
wire joiners
Keep your original wiring harness in the car.
Keep the desiel throttle cable.
Then just a bit of wire joining to be done.
Hope this is what you were after.
PM if you want more.
2.4 desiel to a 2.7 3rz-fe
Just done a 3y to a 2.7 3rz-fe
You will need the
engine
bellhousing + shifter fork & throwout bearing
clutch
clutch slave + master cylinder
wiring harness off the motor
computer
fuel pump ( I used the complete fuel tank from a 2.7 lux, pump in tank)
2 30amp relays
extra wire
wire joiners
Keep your original wiring harness in the car.
Keep the desiel throttle cable.
Then just a bit of wire joining to be done.
Hope this is what you were after.
PM if you want more.
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Who is online
Users browsing this forum: No registered users and 92 guests