GQ CV's

Post by **Puddlejumper** » Fri Feb 16, 2007 9:07 am

Hi all, This question has probably been asked before but... Is there any company out there who makes CV Joints that are stronger than the factory Nissan ones?

Post by **GQ TROL** » Fri Feb 16, 2007 9:33 am

Howatt Engineering in Wellington will modify GQ CV's with a steel ring around the bell to lessen the chance of the bell breaking. But it does nothing to stop the start and inner race from imploding, which I think is a more common problem.

Until Chromoly CV's start coming on line, your only other alternative is to fit a GU front diff as it has larger CV's, or CV eliminator kits from overseas.

Post by **jessie928** » Fri Feb 16, 2007 10:28 am

with modifications, you can get longfields on aswell.

Jes

Post by **Zookman** » Sat Feb 17, 2007 3:25 pm

Haltech in Queensland also produce some good quality modified GQ CV joints. We ran them last season with very good results.

Post by **matthewK** » Sat Feb 17, 2007 11:16 pm

id stick with gen GQ/GU cv,s strong as fark week point of the CV is in rev anyways

Post by **bogged** » Sat Feb 17, 2007 11:42 pm

I think Wendle mentioned something about some super ones being made at moment. this thread was only in the last few weeks...

Post by **badger** » Sun Feb 18, 2007 7:56 pm

how much are the haultech cv's

Post by **OLRacing** » Tue Feb 20, 2007 10:58 pm

I run Brenchell Hardened CV made in WA one of the strongest CV's I've found on the market, Friend had the Haultec ones in his GQ ute and broke one real easy the other day and his truck had hardly done any work, Mines done two Outback Challanges and a few other events and no problems yet with the Brenchell CV's

Post by **GQ TROL** » Wed Feb 21, 2007 7:36 am

I run Brenchell Hardened CV made in WA one of the strongest CV's I've found on the market, Friend had the Haultec ones in his GQ ute and broke one real easy the other day and his truck had hardly done any work, Mines done two Outback Challanges and a few other events and no problems yet with the Brenchell CV's

Who from? How much? And what do they do to them? i.e. ring around the outer, or are they Chromoly etc?

Post by **Zookman** » Thu Feb 22, 2007 2:36 pm

I think i paid $700.00 a pair.

Post by **badger** » Thu Feb 22, 2007 3:01 pm

at 700 a pair if i broke one id insert it in the guy that sold it to me

they would wanna be strong.

Post by **GQ TROL** » Fri Feb 23, 2007 4:29 am

I think i paid $700.00 a pair.

Were they the Haultec ones or Brenchell? What has been done to them? How have you found them performance wise?

Cheers

Outer Limits 4x4 Board

GQ CV's

GQ CV's

Who is online