I know that the early 80s are about 40mm higher from the factory that the later ones, but, does anyone know how the height difference is acheived?
I was thinking spring perch height?
Or if the radius arms are the same or different. I was thinking as mine is a lower 97 model, would the earlier higher model radius arms have different caster built into them. If so I could use the earler model arms with factory bushes instead of using castor bushes in mine. Any one know or am I dreaming?
Alec
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Where is the height diff between early and late 80s?
Moderators: toaddog, Elmo, DUDELUX
Where is the height diff between early and late 80s?
GO the 80...The mods have started :-)
I think it more like 20mm on 90 and 91 models. The only difference I have noticed is that the springs are longer from the factory.
Shane
Shane
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Who is online
Users browsing this forum: No registered users and 0 guests