ARB wiring, little help please

[Damo]

I was putting my ARB loom back in tonight and found a couple of wires that go nowhere. One's blue/white and the other is red/yellow. I have the all the switches hooked up correctly, and know where the rest of the plugs go but aren't sure about these 2.

Can someone help me out?

[hophoar]

From memory the blue/white goes to a dashlight power scource and the red /yellow goes to Ignition power.

John

[spazbot]

yeah that sounds bout right
, one is so the switchs light up when you turn on your head lights etc and the other is so that it will only run when you got the car running

[4wd_addict]

yeah sounds right.....but
define nowhere do thay just hang there or do thay go to something.

[big red]

blue/white goes to dash illumination.
red/yellow goes to ignition.
If you cut the yellow wire that goes to switch 2 [front locker] and join it to the red wire that goes to switch 1 [rear locker] you get the lockers to switch independantly of each other.
make sure you "make safe" the cut yellow wire that goes into the wiring loom as this wire becomes live when rear locker is switched on.
shane.
emailed ya the wiring diagram.