Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1.6onvertion

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 110
Joined: Tue Jul 15, 2003 4:57 pm
Location: Melbourne

1.6onvertion

Post by Daniel »

i have put a 1600 into my sierra, engine runs perfect but i have an issue with the starte motor.

i used an adapter plate, bolted the 1.3 starter in ( i grinded off some of the starter to fit....) bolts up fine... started the car up and it makes an awfull crunch sound, like the gears are meshing... i then took that starter out and put another in... same problem... what could it be??

could it be that the adapter plate is wrong or on slightly off center??

Dan!
uh huh
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

May want to check these threads

http://www.outerlimits4x4.com/viewtopic ... ht=starter

http://www.outerlimits4x4.com/viewtopic ... ht=starter

http://www.outerlimits4x4.com/viewtopic ... ht=starter

Did u put another 1,3 starter in or a 1,6 one? There is two different ones with either a short or long nose i believe.

did the person who sold the adapter plate say what one to use?

Nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 4 guests