Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

H260 diff. Spline count?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 212
Joined: Tue Sep 07, 2004 9:28 am
Location: Panama, Central America

H260 diff. Spline count?

Post by Mario »

Well mates, I´ve learned to identify both the H233B and H260. Now I understand there´s 2 versions of the H260 (according to the ARB catalog), the 34 spline and the 37 spline ones. Is it possible to visually identify the 34 from the 37 spline ones just by lookling at the axle? Do the 37 splines are all full floaters? Because I saw a 3.0 GU wit semi floater H260.

Please advise,
GQ TD42, OME 5" suspension, 3" bodylift, shimmed V6 Pathfinder LSD front, ARB rear, Safari snorkel, custom front and rear bumpers, Nissan 4.625 R&P, 37" MTRs.
Panama, Central America
Top
Posts: 625
Joined: Fri Feb 20, 2004 12:04 am
Location: Melbourne

Post by Woop »

Full floating versions of the H260 came out in some versions of Cabstar trucks--easy to identify as the Hubs/stub axles are bigger than the full floating version used only in the GU utes/cab chassis. All other H260's used were semi floating including the G60 and MQ/MK utes. I think the 34 spline version only came out in some versions of MK utes....Turbo diesel maybe.. :?:

Nick
Top
Posts: 212
Joined: Tue Sep 07, 2004 9:28 am
Location: Panama, Central America

Post by Mario »

So you can find 37 splines H260s both semi and full-floating ?
GQ TD42, OME 5" suspension, 3" bodylift, shimmed V6 Pathfinder LSD front, ARB rear, Safari snorkel, custom front and rear bumpers, Nissan 4.625 R&P, 37" MTRs.
Panama, Central America
Top
Posts: 625
Joined: Fri Feb 20, 2004 12:04 am
Location: Melbourne

Post by Woop »

H260 was semi floating in all Patrols prior to the GU The full floating version in the GU still uses 37 spline 1.5" dia axles, but they taper down a fair bit at the stub axle end. I guess this is due to the ID of the stub axle. The Cabstar truck H260 has much bigger stub axles(the axle shafts dont taper down like the patrol and are 1.5" diff to hub) and correspondingly bigger hubs. But its stud pattern is very different to the 6 stud found on the Patrol.

Nick
Top
Posts: 212
Joined: Tue Sep 07, 2004 9:28 am
Location: Panama, Central America

Post by Mario »

So they only way to tell a 34 spliner from a 37 is disasembing it? There's no mark or sign (or special characteristic) to look for?
GQ TD42, OME 5" suspension, 3" bodylift, shimmed V6 Pathfinder LSD front, ARB rear, Safari snorkel, custom front and rear bumpers, Nissan 4.625 R&P, 37" MTRs.
Panama, Central America
Top
Posts: 625
Joined: Fri Feb 20, 2004 12:04 am
Location: Melbourne

Post by Woop »

I dont believe they look any different externally to the 37spline version :bad-words:

Nick
Top
Posts: 212
Joined: Tue Sep 07, 2004 9:28 am
Location: Panama, Central America

Post by Mario »

The Cabstar truck is the pick up truck?
Image

What's an "ute" ? A pickup?
GQ TD42, OME 5" suspension, 3" bodylift, shimmed V6 Pathfinder LSD front, ARB rear, Safari snorkel, custom front and rear bumpers, Nissan 4.625 R&P, 37" MTRs.
Panama, Central America
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests