Im wondering on the WT model Sierra is it a Home job to replace the bearing and seal at the front of the diff where the drive shaft bolts up I believe its called the Pinion seal...? (Im not sure if it is)
Has anyone done this before or is it a Diff shop job with a press needed...?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Replaceing Pinion bearing and seal...? Help needed
Replaceing Pinion bearing and seal...? Help needed
..wrench, wheel, wreck repeat..
check out the action @ http://www.darwin4x4.net
check out the action @ http://www.darwin4x4.net
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
Seal is a home job for sure. But bearing is a bit more involved, and you will need to be confident with setting up a diff as far as backlash etc is concerened as you will need to remove the hemishpere etc to remove the pinion shaft to access the 2 pinion bearings.
Layto....
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
If the pinion has any movement in it at ALL except rotational, the pinion bearing is most likely farked the flange should not be able to move up, down, Left or right - if it can the bearings are stuffed. If the pinion moves in and out of the housing then the crush tube is buggered.
The whine - Is it all the time (most likley bearings) or under accelleration only or under decelleration only if either of these last couple are true it may need re-setting the backlash and depth up or the case hardening on the teeth has worn through.
Ive seen the mud you guys play in - have you had any in your diff ?
The whine - Is it all the time (most likley bearings) or under accelleration only or under decelleration only if either of these last couple are true it may need re-setting the backlash and depth up or the case hardening on the teeth has worn through.
Ive seen the mud you guys play in - have you had any in your diff ?
Posting quality not quantity!
Wanted: Stock HiLux Front Leaf Springs
Wanted: Stock HiLux Front Leaf Springs
Ive had plenty a times of getting water in the diff but it has been changed straight after with in a day and no driving until its done. I dont believe I have mud or dirt in there but obviously the water would have been dirty so yes it most likely could have got in there.
I have checked for movement and nothing at this stage so I will pull the drive shaft of and see if it moves at all. The whines seems to come on after a certain speed or goes away around some corners.
As for the Mud we go in for the others that might not know, check out link below on our local forum for a Idea of mud and water we go in...
http://www.darwin4x4.net/forum/viewtopic.php?t=431
I have checked for movement and nothing at this stage so I will pull the drive shaft of and see if it moves at all. The whines seems to come on after a certain speed or goes away around some corners.
As for the Mud we go in for the others that might not know, check out link below on our local forum for a Idea of mud and water we go in...
http://www.darwin4x4.net/forum/viewtopic.php?t=431
..wrench, wheel, wreck repeat..
check out the action @ http://www.darwin4x4.net
check out the action @ http://www.darwin4x4.net
Who is online
Users browsing this forum: No registered users and 1 guest