Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Sals ratios?

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 57
Joined: Tue Apr 13, 2004 8:21 pm
Location: North Brissy

Sals ratios?

Post by subaman »

Hey guys thinking about fitting sals to my classic rangie, as cant afford maxis at the moment. Are they the same ratio as the rangies or different? any help would be much appreciated cheers shaneo
gas grass or arse no one rides for free
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

All 110 sals diffs are 3.54:1 - same as your rangie.

Leaf sprung (SIII and perentie 6x6) sals are 4.7 - but these are too narrow/wide respectively for your rangie and don't have coil mounts. Stage 1 V8 are also 3.54:1 but again too narrow.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 57
Joined: Tue Apr 13, 2004 8:21 pm
Location: North Brissy

Post by subaman »

thanks for the reply was thinking of making mounts and such for leaf sprung series 3 diffs but now knowing that they are to narrow/wide I wont be doing that. Cheers shane
gas grass or arse no one rides for free
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

subaman wrote:thanks for the reply was thinking of making mounts and such for leaf sprung series 3 diffs but now knowing that they are to narrow/wide I wont be doing that. Cheers shane
To convert a leafer sals into a coiller, you need to lengthen the long side axle tube by 6" (and fit a longer axle shaft naturally), and weld on all the coiller mounts. However the A-frame mount is cast into the centre, so unless you are fitting custom links (or can do it without welding to the cast centre) it is not a good idea.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 57
Joined: Tue Apr 13, 2004 8:21 pm
Location: North Brissy

Post by subaman »

It was all going to be custom but sounds like to much of a mission thanks for the advice though ;)
gas grass or arse no one rides for free
Top
Posts: 128
Joined: Tue Dec 14, 2004 9:08 am
Location: Mooroolbark, Victoria

Post by sclarke7171 »

I have a 110 Salisbury for sale, Disc to disc.
its a straight bolt in for a Rangie or Disco 1

PM me if your interested
1986 County, Auto, Locker, Maxi Crawler gears.
1987 RRC, Auto, Lockers, Himount. POS
Top
Posts: 57
Joined: Tue Apr 13, 2004 8:21 pm
Location: North Brissy

Post by subaman »

Thanks for the offer mate but a maxi came up at a to good to be true price so went that way instead. :armsup:

cheers shaneo
gas grass or arse no one rides for free
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 1 guest