Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

need help

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 212
Joined: Thu Aug 21, 2003 5:15 pm
Location: Birkdale

need help

Post by SASS »

Hey fellas,
Im after a little help in finding some information.
Im loking at buying a gq wagon and converting it into a dual cab style side ute by chopping the roof off inline with the back of the back seats and along the bottom of the rear side windows. The problem is that im not sure what size tray this is going to leave me.
If anyone out there has a measuring tape and a gq could you possibly send me through a few measurements, from the back of the rear seats(middle row) to the inside of the rear doors, the width of the rear cargo area, and the depth of the tub to the bottom of the rear side windows.
Any information would be muchly apprecieated.

CHEERS

SASS :onfire: :onfire: :onfire:
Stick it in low and NAIL IT !!!!!!!!!!
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...

Post by Area54 »

Okay, about 1050mm from back of rear seat to inside rear door, 450mm tub depth (-/+ 10/20mm for carpet etc) 1420mm wide
Built, not bought.
Posts: 312
Joined: Sat Feb 08, 2003 12:49 pm
Location: Esperance WA, currently travelling around OZ

Post by GQ Toy »

Have seen a nissan chopped like that in Perth looks very trick
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests