Replacing sump gasket on td4.2

Post by **davez104** » Thu Mar 01, 2007 12:35 pm

Hey all,
Looks like I've got a bit of oil leaking from around the sump, just wanting to know if this can be replaced without lifting the motor at all. Just by having a quick look, I reckon it shouldn't be too hard, but thought there would be plenty of people here that have done it themselves.

thanks.
Dave.

Post by **jessie928** » Thu Mar 01, 2007 12:40 pm

you dont have to lift the engine to do it

easy as.

Jes

Post by **shakes** » Thu Mar 01, 2007 4:27 pm

looong socket extension for up and around the back.

a tub to put the 40 odd

bolts in.

and a couple of beers...

Post by **tna racing** » Thu Mar 01, 2007 4:27 pm

drain the oil out n unbolt it its easy

Post by **bogged** » Thu Mar 01, 2007 4:28 pm

could you change a sump on a TD42 on a GU without removing the donk? or only change a gasket?

Post by **shakes** » Thu Mar 01, 2007 4:31 pm

late model GQ ('98) sump was removable with a bit of

Post by **tna racing** » Thu Mar 01, 2007 4:37 pm

y would they change the sump set up on a gq dnt u mean a early model gu

Post by **jessie928** » Thu Mar 01, 2007 9:31 pm

you can remove gu and gq without removing engine. just jack the chassis away from the diff to make it slide out easyer

Jes

Post by **bogged** » Thu Mar 01, 2007 10:00 pm

jessie928 wrote:you can remove gu and gq without removing engine. just jack the chassis away from the diff to make it slide out easyer

Jes

thats dude... mine has a large woof in it, would like to remove and repair or replace.

Post by **davez104** » Fri Mar 02, 2007 7:36 am

Thanks guys, should be a pretty simple fix then.

Dave.

Post by **tna racing** » Fri Mar 02, 2007 11:03 am

ur welcome mate

Outer Limits 4x4 Board

Replacing sump gasket on td4.2

Replacing sump gasket on td4.2

Who is online