Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

The new zook runs - now offroading :) with pics + vid

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

The new zook runs - now offroading :) with pics + vid

Post by nicbeer »

thought i would post up the new zook runs. 1.6 mpfi into sierra.

small issues with fuel pump (one dead) but otherwise all good.

started wiring today > finshed today at least to start + run. wired in a 446i alarm + integrated into sierra harness. needs a massive cleanup and wire wrapping.

gotta work out why most dash is not working, oil pres and tach, and light work.

picks up damn good. luvin it sofar.

Nic :armsup: :armsup:
Last edited by nicbeer on Wed Jun 27, 2007 1:32 pm, edited 2 times in total.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 870
Joined: Sat Jun 03, 2006 5:32 pm
Location: sydney

Post by MART »

Good to see nic somebody actually walking the walk,instead of talking the talk,good jobCheers.Paul P.S. Post some pics.
BLOWNZUK 1.3 efi,sc14 supercharger,hilux diffs,detroit lockers,stage 4 rockhopper,6 point cage,35 muddies.
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

thx

will do.

got all std zook bits working now. inc heater,wipers,ign. all dash lights etc.

found out that the dash fuel gauge and temp have got a common 7v wire inside cluster. the wire was fried in the fuel side. once removed and soldered all good. vss inside factory cluster also.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 424
Joined: Sun Jun 11, 2006 9:15 pm
Location: PMQ

Post by =SKB= »

MART wrote:Good to see nic somebody actually walking the walk,instead of talking the talk,good jobCheers.Paul P.S. Post some pics.

x2 :D
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

he he. cheers. getting there.

Pics, not much to so at the moment aside from my thread in members.

Rear bar painted
Image
front 3/4 view
Image
rear disc kit ready (waiting on new wh bearings)
Image
tidy wiring (mostly vit but some sierra ones in there)
Image

Nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Banned
Posts: 2041
Joined: Mon Jan 24, 2005 7:41 pm

Post by Red_Zook »

nicbeer wrote: Image
HMMMM looks familiar
those plates wernt black when they left my house!!!!!
Posts: 286
Joined: Fri Jul 23, 2004 11:47 pm
Location: ex perth now south of brissy

Post by Drew »

good stuff nic :armsup:
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

Good work, good to know im not the only mug who only has a carport to work under.

How easy is it to remove the dash? I need to replace a speedo cable
Motorized three seater couch buildup:

http://www.outerlimits4x4.com/viewtopic ... 0&t=196047
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

PJ.zook wrote:Good work, good to know im not the only mug who only has a carport to work under.

How easy is it to remove the dash? I need to replace a speedo cable
a pita i would think. i still have to find everyhting round here to put back in it.

carport rox. need ac thou.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 5634
Joined: Sun May 08, 2005 10:07 pm
Location: diagonally parked in a parralell universe

Post by fool_injected »

Great work :armsup:
[url=http://www.4x4masters.com.au/]Australian 4X4 Masters Series website[/url]

non illegitimi carborundum!

[url=http://www.suzuki4wd.com.au/forum/]Suzuki 4wd Club of NSW forum[/url]
Banned
Posts: 2041
Joined: Mon Jan 24, 2005 7:41 pm

Post by Red_Zook »

nicbeer wrote: carport rox. need ac thou.
ac in the carport.........
dont think that will work for some farked up reason
Posts: 677
Joined: Sat May 14, 2005 7:22 pm
Location: Melbourne

Post by foolsp33d »

nice DANGER sign :D fits the pics well!
[quote="-Nemesis-"][quote="bj on roids"]whens the aussie one start?[/quote]

A few episodes before they can it? :lol:[/quote]
Posts: 394
Joined: Mon Jan 15, 2007 2:03 pm
Location: Perth - NOR, WA

Post by Dooley »

Carports better than on the side of the road. :D

Nice going.

Have fun with that wiring job, looks like a real PITA...
04 Ford Courier TD
Bye, bye Sierra... :'(
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

hey,

reviving a post.

Now has driven around the street. :)
still got issues with brakes, need bleeding again. but damn its got some juice in the 1.6 and welded rear, burnouts are hard not to do in the driveway.

How she sits now, with inc sand flag.

Image

Image

Image
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

Well done! :armsup:

Steve.

I still owe you some information about bar strengthening :oops: Haven't forgotten.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 1213
Joined: Wed Oct 26, 2005 8:25 pm
Location: SE Melbourne

Post by dank »

Nice rig Nic! Looks the goods and sounds like it goes even better! My 1.3 is on the way out...starting to explore options...1.6 mpfi sounds like a great option. good luck with it. :cool:
Work - KPD4X4.COM - KPD Industries Australian Distributor of Diesel Power Modules - Germany.
Play - dank's zook
Posts: 249
Joined: Tue Apr 17, 2007 9:55 am
Location: Perth, Western Australia

Post by cjdeane10 »

Nice work!

Who did your rear wheel carrier? I am very interested in one like yours!
Someone in Perth? Cost?

Also - wiring always does my head in - you have done a super job!
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

CJ - always welcome to have a look,

Was made by a mate, basically C channel of about 100x50x5 and uses a trailer stub to piviot from.

wiring was fun, still doing little bits as i go trying to get it neat etc.

Nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 394
Joined: Mon Jan 15, 2007 2:03 pm
Location: Perth - NOR, WA

Post by Dooley »

Very nice.

She doesn't like pretty but as dank put it, she looks the goods.
04 Ford Courier TD
Bye, bye Sierra... :'(
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

some pics of it moving now.

snorkel also made its money worth with the river crossings and big mud/water holes. lockers and 1.6 efi is awesome.

wont worry about getting gears for now as could crawl on idle easily for now all the hills i was playing on. and power is there when u need it. have to look at cranky idle still and minor issues under there.

fuel tank now has about a 5L dent in there, damn coke cans. going for a long range arb maybe.
and transfer mount dead, will be making my own there.

bascially for first trip away from metro area for the build it worked v/well and mates were impressed by its capabilities.

Now for the pics, will get more off mates video and his cameras laters

Image

Image

Image

Image

Image

Image

Nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 5634
Joined: Sun May 08, 2005 10:07 pm
Location: diagonally parked in a parralell universe

Post by fool_injected »

:armsup: :armsup: :armsup: :armsup: :cool: GOOD GOIN :armsup:
[url=http://www.4x4masters.com.au/]Australian 4X4 Masters Series website[/url]

non illegitimi carborundum!

[url=http://www.suzuki4wd.com.au/forum/]Suzuki 4wd Club of NSW forum[/url]
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

Sorry - double post :oops:
Last edited by Gwagensteve on Mon Jun 25, 2007 8:47 pm, edited 1 time in total.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

:armsup: Nice work!

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 47
Joined: Fri Oct 13, 2006 9:25 pm
Location: willetton perth

Post by 83jack »

nice one nic, where abouts did you take it for its first run, looks like fun.
got any more pics of your cargo barrier? i am looking at doing something like that for mine.
cheers
simon
Posts: 567
Joined: Fri Nov 10, 2006 7:51 pm
Location: Victoria

Post by Remydog05 »

Well Done mate

1.6 is fun huh! They sit on the Rev limit pretty happy too!

They jump Pretty good in Low range on little hump in the bush too :twisted: !

Ive found mine to still need trans gears because It stalled up difficult rutted hills that are really steep. You cant attack them because of the holes/rutts and my gearing with stock 1.3 trans is was too high for really low controlled stuff.

Do you run the 1l trans with 30's or 31's??
Mooney Yee Haa
Go Off like a Frog in a SOCK!
I didnt do it! - Bart
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

bout time ya got that pos goin :finger: , were did ya go for a spin, dont look familiar.
buggy time............
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

bazooked - thought u would know. it is the collie area near big tree road. that track in pics is near the back off bobs hill sort of area next to a fenceline. i had a look at bobs and thought nope not for me for now anyway.

Remy - running 31s with NT 3.9 ratios in WT diffs and also the 1L case. yes the 1.6 can provide some kick in low when needed.

83jack - cargo barrier is made by jaram originally. check my members thread for some more pics, link is in sig. did quite a few tracks down there but this is all i got on the still camera as most on vid. barrier is awesome for tying stuff down in back.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 5062
Joined: Tue Mar 09, 2004 5:06 pm
Location: queensland

Post by ofr57 »

geee that goes great .. :armsup:
[color=green]Vote Earth[/color]
Posts: 763
Joined: Wed Jun 16, 2004 3:58 pm
Location: Victoria, Australia

Post by vicelore »

sounds real nice too bud.. top job. i want!!!
91 SWB sierra, 2in spring lift, 2in BL 32 simex ETs, Series 4 RH gearing.

[url=http://www.outerlimits4x4.com/phpBB2/viewtopic.php?t=110288&highlight=]My build up thread[/url]
Post Reply

Who is online

Users browsing this forum: No registered users and 39 guests