Hey,
I've got a std '98 Challenger with a problem on the spare wheel hoist: seems like the chain-wheel might have a tooth missing or something similar. It'll hoist for a bit, then slip back down.
Anyway, what do you reckon for a simple fix? Replace the whole unit, or just the chain-wheel? (I haven't got into it yet, to confirm exactly...) Would it have to be Challie donor, or would a paj unit fit? (hoists from inside the boot.)
And then, i guess, what would be a good cost for a rear bar with spare mount? For those who have one, does it become a bugger to swing it away to open the rear door?
Cheers for your help.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Spare tyre Hoist
Moderator: -Scott-
Re: Spare tyre Hoist
Well, Pajeros have the spare on the rear door (where it belongs ) so you could have trouble making a Paj unit fit.RO8M wrote:Would it have to be Challie donor, or would a paj unit fit? (hoists from inside the boot.)
Now is your opportunity to sell your other half on a rear bar/carrier, so you'll have room for a monster long range tank, for some of those longer outback treks.
Good luck,
Scott
Who is online
Users browsing this forum: No registered users and 0 guests