Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
253 V8's
253 V8's
Just want to know how these engines go. I am just dreaming about the future mods i could do. If it was reconditioned and new stuff like intake and new demon carby and extractors and sh!t like that would they be pretty good hooked up to an auto inside a shorty MQ patrol?
Re: 253 V8's
if your going to that effort to do an engine swap, dont bother with a fluffy.. go with a 308/350...
Re: 253 V8's
Don't waste you time or money with a 253. I have one in a WB 1 tonner. Uses just as much fuel as a 308 and wouldn't pull the skin off custard. Like Bogged said go 308 or preferably 350 or 383 stroker.maccasMQ wrote:Just want to know how these engines go. I am just dreaming about the future mods i could do. If it was reconditioned and new stuff like intake and new demon carby and extractors and sh!t like that would they be pretty good hooked up to an auto inside a shorty MQ patrol?
Shane
God of Magnificant Ideas!
They go pretty good im an MQ,
small 4bbl holley and a set of block hugger extractors makes a huge differance as does an electronic dizzy.
Even a 350 Holley and the rest just left as standard works well, I'm happy with the 253 I have in one of my other rigs.... sweet runner !
They rev harder than the 308 / 350 and will keep reving long after number 7 has fallen out of the 308.
You'll also get a far nicer zorst note out of the 253 aswell
Fuel wise........ they dont use as much as the 350 or 308 but they are thirsty, the stock 2bbl Stromberg carby will see some good MPG figures but dont expect miricles.
LPG is the go
Cost wise they are as cheap as chips and there's plenty out there to choose from.
Kingy
small 4bbl holley and a set of block hugger extractors makes a huge differance as does an electronic dizzy.
Even a 350 Holley and the rest just left as standard works well, I'm happy with the 253 I have in one of my other rigs.... sweet runner !
They rev harder than the 308 / 350 and will keep reving long after number 7 has fallen out of the 308.
You'll also get a far nicer zorst note out of the 253 aswell
Fuel wise........ they dont use as much as the 350 or 308 but they are thirsty, the stock 2bbl Stromberg carby will see some good MPG figures but dont expect miricles.
LPG is the go
Cost wise they are as cheap as chips and there's plenty out there to choose from.
Kingy
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
I had a Red 253 in my old 40 series. I was happy with it.
I tried all sorts of carbies. The best was a Rochester 4 barrel. But I eventually went with the Holley Projection EFI setup. That was awesome - revved nicely and worked on stupid angles As Kingy said, they sound awesome aswell 
Most people wouldn't believe that it was only a 253 under the bonnet
I tried all sorts of carbies. The best was a Rochester 4 barrel. But I eventually went with the Holley Projection EFI setup. That was awesome - revved nicely and worked on stupid angles
As Kingy said, they sound awesome aswell Most people wouldn't believe that it was only a 253 under the bonnet Who is online
Users browsing this forum: No registered users and 7 guests