Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

U.S. rocky valve cover = charade 1.3L valve cover

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Forum rules
Post Reply
Posts: 81
Joined: Thu Jul 21, 2005 7:37 am
Location: Tennessee - USA

U.S. rocky valve cover = charade 1.3L valve cover

Post by Kickingback99 »

Does anyone know if the 1.6L and the 1.3L use the same head. I am in desparate need of a valve cover and can't seem to find one over here.
Top
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Contact:
Contact murcod

Post by murcod »

I've heard of people building hybrid engines using parts from both, so it's possible?
David
Top
Posts: 2431
Joined: Thu Sep 04, 2003 12:02 pm
Location: Stayton, Oregon, USA

Post by SimplyPV »

kicking back, what do you need exactly? i have an extra head(rebuilt) and valve cover that goes with it.
[quote="simplypv"]its a Strine thing and i just dont understand![/quote]
Regards, PV
Team [size=134][color=red][i]Anti-[/i][/color][/size]Asshat [b][color=orange]#5[/color][/b]- Yank!
Top
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

TO the best of my knowlege a 1.3 Appluse uses the same cover as a 1.6.

In fact looking at one at the wreckers awhile ago they seemed to share a common block and head ( and who knows what else ).
Top
Posts: 81
Joined: Thu Jul 21, 2005 7:37 am
Location: Tennessee - USA

Post by Kickingback99 »

simply pv...i would like to find a valve cover. The previous owner tightened one corner too much and snap! Off came the corner. I don't just mean the lip but a small piece of the corner. Upon further inspection there appear to be 1 inch or so cracks on 2 of the the other corners on the inside of the cover. Was thinking about having it welded but have heard mixed opinions on it. I am just tired of the leaking oil from that back corner...any suggestions...
Top
Posts: 2431
Joined: Thu Sep 04, 2003 12:02 pm
Location: Stayton, Oregon, USA

Post by SimplyPV »

i remember seeing a rocky a few years back at my local junk yard. hang tight for a week or two and i'll rummage around for ya.
[quote="simplypv"]its a Strine thing and i just dont understand![/quote]
Regards, PV
Team [size=134][color=red][i]Anti-[/i][/color][/size]Asshat [b][color=orange]#5[/color][/b]- Yank!
Top
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Contact:
Contact murcod

Post by murcod »

I've seen one successfully welded before on an Applause (same engine.) But if you've got a lot of cracks it might not be economical to repair?
David
Top
Posts: 81
Joined: Thu Jul 21, 2005 7:37 am
Location: Tennessee - USA

Post by Kickingback99 »

yeah, if you see one simplypv, let me know. I am not in any hurry as I am fixing a blown head gasket. I'll go see what it would cost to get it welded in those spots, but I'd still like to have one that's not had to be welded, if I have a choice.

Haven't found a yard around here that has any rockys as of yet or I could go look.
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

MightyMouse wrote:TO the best of my knowlege a 1.3 Appluse uses the same cover as a 1.6.

In fact looking at one at the wreckers awhile ago they seemed to share a common block and head ( and who knows what else ).

You will be looking for a 1.3L applause for a whilem, as they did't have a 1.3L engine. They had the 1.6L, which was just a stroked version of a 1.3L pretty much. The rocker cover will swap from emory. I thing that the 1.3L will fit, but not totally sure. I have access to a 1.6L applause and a 1.3L charade, so will have a look in the next few days.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

Can testify the 1.3 ltr and the 1.6 ltr Applause rocker covers are the same.

Have a recycled 1.3 on my 1.6 as it was cracked when bought.

As for the charade.... I know nuthing.
Top
Posts: 81
Joined: Thu Jul 21, 2005 7:37 am
Location: Tennessee - USA

Post by Kickingback99 »

thanks...the only 1.6L were in rocky's here in the U.S. with the 1.3L in some charades. Thought it would broaden my possibilities...
Top
Posts: 2431
Joined: Thu Sep 04, 2003 12:02 pm
Location: Stayton, Oregon, USA

Post by SimplyPV »

hey kicker, i asked around and turned up nothing. was informed that the 1.3 charade cover would indeed fit. try that as the charades are more common here in the states than the rocky.
[quote="simplypv"]its a Strine thing and i just dont understand![/quote]
Regards, PV
Team [size=134][color=red][i]Anti-[/i][/color][/size]Asshat [b][color=orange]#5[/color][/b]- Yank!
Top
Posts: 7
Joined: Mon Jan 08, 2007 12:07 pm

Post by Colby Bruce »

kickingback99, Johnny Hulsey Truck Parts in Gainesville, GA had a couple of Rocky's a year ago...not sure what was left on them. There are a few running around the Atlanta, GA area. I have a co-worker who owns a Rocky, and wants to sell it.
Top
Posts: 81
Joined: Thu Jul 21, 2005 7:37 am
Location: Tennessee - USA

Post by Kickingback99 »

thanks, will try a call today or tomorrow...what's your friend selling his for?
Top
Post Reply

Return to “Ford / Mazda / Daihatsu / Homeless”

Who is online

Users browsing this forum: No registered users and 1 guest