Ok now before anyone says it ive looked in the bible and the threads didnt work. Ive just looked at the web for about a hour and no luck apart from full kerb or GMV weights.
So! Does anyone know the weights of the following?
1/ 1.6 efi motor
2/ 1.6 Auto box
3/ 1.6 5spd box
Thanks!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
1.6 Engine and Box Weight??
1.6 Engine and Box Weight??
Mooney Yee Haa
Go Off like a Frog in a SOCK!
I didnt do it! - Bart
Go Off like a Frog in a SOCK!
I didnt do it! - Bart
not sure individual but
cost me for about 400kg (88 shape 16v auto frontcut)
i would say the auto was about 70-80kg as i just sent one to melb.
engine complete would have to be aorund 100kg with all acc's bolted on still
cost me for about 400kg (88 shape 16v auto frontcut)
i would say the auto was about 70-80kg as i just sent one to melb.
engine complete would have to be aorund 100kg with all acc's bolted on still
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
nicbeer wrote:not sure individual but
cost me for about 400kg (88 shape 16v auto frontcut)
i would say the auto was about 70-80kg as i just sent one to melb.
engine complete would have to be aorund 100kg with all acc's bolted on still
The motor could not be that heavy, could not be much more than 45Kgs as I can lift one to waist height without any real problems (my back is little bit sore now because last weekend I put a 1.6 im my little red sled unassisted ... ie no engine hoist etc)
That was the complete motor (8v carb with clutch, exhaust manifold, carb etc ... )
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
How ?nicbeer wrote:this was a 16v and a heavier than the carb 1.3 definetly. as we lifted one out as well. as well with starter/alt/flywheel etc.
They are not that different apart from the slightly taller all alloy block. There could not be more than a few KG's in it...
Vit auto being 60kg's, that would have ot be a 4 speed as the old three speed traumatic would not be that heavy I am sure.
I will see what the shipping weight (if it has one) is on my 1.6.. if I still have the con note anywhere.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Who is online
Users browsing this forum: No registered users and 3 guests