35's for Hilux

[muddylux]

Got a 93 Lux with 2" spring lift and trimed guards and will be moving the front diff forward 33mm. Will I be able to run 35's on it whith this set up, and if so would I be better to run Cruiser offset rims and why.

[crack]

im thinking of dong tthe same thing excpet i havnt cut the gaurds but i have a 2" body lift. any tips of moving diff forward...think theres a thread somewhere maybe i skiped past it

[batcho101]

shoudl be fine i ran sagged 2 inch lift leaves with 2 inch body and diff forward 35mm and only ever just scrubbed and that was if i had one side fully flexed up with all the weight of the car on it. i'll see if i have a pic

[batcho101]

here u go not the best pics but you'll get the idea

35 up in the guard without scrubbing


side on shows ride height sorry i dont have a better one

[ingram1_2000]

I run 3 inch spring lift, 2 inch body lift, 2 inch shackles with the diff relocated 25mm forward and my 33's still rub under full compression????

[Sic Lux]

If your getting steering arm shortened/adjustable and tail shaft lenghtend go 50mm that way the option is there for RUF and mines around the 35 mark and they hit a bit still after heavy handed sledge hammer work you'll prob have to run spacers or fliped rims so the wheels don't hit shock mounts on front and they'll buff chassis on rear when flexed, Mine with the 31's no spacers hit chassis on rear, and yeah if running 35x11.5 or 35x12.5 id at least run a 8" wide rim(cruiser) they recomend a 10" rim for my 11.5 simex's

They hit it that photo and wheel isn't at full lock
You can see if that wheel was turned they would scrub and that isn't quite fully compressed

[batcho101]

i dont see why you'd have a problem with 3 inch spring and body lift mine when at ride height sitting level the 35" tyre on the rear sat an inch up on the chasis. as in where the rear steel bumpstop is. i even ran this setup without the diff forward for about 4 trips and was only gettin light to medium scrubbing.
i now have rears up front and should clear 38's
will try and get some more pics

[HIL01X]

i dont see why you'd have a problem with 3 inch spring and body lift mine when at ride height sitting level the 35" tyre on the rear sat an inch up on the chasis. as in where the rear steel bumpstop is. i even ran this setup without the diff forward for about 4 trips and was only gettin light to medium scrubbing.
i now have rears up front and should clear 38's
will try and get some more pics

Maybe because it's a different model for a start.

[Sic Lux]

Good and aslo offset comes into play when the wheel turns with larger offset it will move further if you need more of explanation just say and i'll do some sketches to explain it

[bigads]

to fit 35's on a 84 4runner im assuming i'd alos have to move the front diff forward??

[tuff-lux]

Gday mate i ran my 35 claws with little scrubing, i then ran 4" springs with snake extended sha and and 3" body blocks without any gaurd trimming and not moving the front diff forward. BUT i would ifiwasyou run less lift in springs and put rear springs in front to move the front diff and get better flex. and trim the gaurds if need be but mine was just to tippy the first way i did it. Also off set rims or wheel spaces help keep it stable with a wider track to even out the extra hight.

[crack]

wats involved with running rear springs up front? owuld take make a harder ride?

[tuff-lux]

in most cases you just remove the load barers and they ride ok, you need to look at shocks, brake lines, drive shaft, and steering. if you dont want to do all that you can redrill your spring perchers thats a easy fix with a lot less involved but wont move it as far forward.

[Sic Lux]

When mate done RUF he used 2 set's on 2in lifted rears to make up the pack worked out well i have pic's of them trhey are also on another thread if you can't find it i will Tonka them here if you want

[nate_lux]

Sic Lux-fark yeah man looks mad

[Sic Lux]

Sic Lux-fark yeah man looks mad

yeah me misuus was going off just cause she was basicly hanging off the holy shit bar but drove it all the way(username pic) .