Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What's it worth?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 766
Joined: Mon Dec 30, 2002 3:08 pm
Location: Melbourne

What's it worth?

Post by jtraf »

May need to move the LWB sierra onto a new home....

What it has......

1985 LWB Sierra
* M13A and 4speed auto from 2000 Jimny 45000 kays
* Power steering setup from a Jimny
* Rebuilt WT diffs with ARB rear locker and welded front, all new bearings front and rear and NT perches. New disks and brake pads. Rear Disk brake conversion with handbrake connection all done. Vitara gearing in the diffs....
* series 3 rockhopper transfer case
* 4 new 34/10.5/16 swamper LTB
* Custom 3 core radiator
* Power steering cooler
* Alloy auto cooler
* Vitara efi fuel tank custom in rear so that tank sits level with bottom of chassis. Uses original filler location in the rear
* New OME rears all round
* All new bushes suspension bushes all round
* OME N76 shocks in box
* VDO and assorted gauges new in box

Chassis and engine conversion is complete. Had it running and only need to have wires tidied and dash installed to be driving. Need to be painted or touched up. It is all there and needs a little time spent on it......

Will post a link to member as it has a couple shots of it.....

http://www.outerlimits4x4.com/viewtopic ... f6b2213843

What is it worth complete as I have a fair idea what I will get for parts....not far from being finished and would rather see it finished than wrecked out....
Top
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

is the work thats been done engineered?
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Top
Posts: 766
Joined: Mon Dec 30, 2002 3:08 pm
Location: Melbourne

Post by jtraf »

All work has been agreed upon with engineer.

It has not been inspected yet but it is not completed.

He wanted brake upgrade etc......but will not engineer with 34's.....

other than that no issues......
Top
Posts: 396
Joined: Fri Dec 24, 2004 4:05 pm
Location: in the shed cutting/grinding/welding mocks old shit vic

Post by mugginsmoo »

pm sent

Mitch
[quote="Gwagensteve"]
nope, apparently I hate suzukis so nobody should be surprised by that :roll:

Steve,[/quote]
[url=http://vic.suzuki4wd.com/]Suzuki 4WD club VIC[/url]
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest