Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Lex V8 and auto length

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 2254
Joined: Tue Dec 10, 2002 5:09 pm
Location: Sydney

Contact:
Contact jessie928

Lex V8 and auto length

Post by jessie928 »

gidday guys,

has anyone got a 1uz and its origional auto lying around somewhere??

I need a length from crank pulley to output shaft :)

Cheers,
Jes
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
Top
Posts: 48
Joined: Mon Mar 14, 2005 6:52 am
Location: New Zealand

Contact:
Contact jafa

Post by jafa »

I'll measure up tomorrow for ya
'85 Hilux 3rz, duals, 4.7's,6stud histeer,Racerunners up front, coils rear , 30spl longs, on 40" Iroks

[url=http://www.snr4x4.co.nz][size=200][color=red][i]SNR4x4[/i][/color][/size][/url]
Top
Posts: 2254
Joined: Tue Dec 10, 2002 5:09 pm
Location: Sydney

Contact:
Contact jessie928

Post by jessie928 »

jafa wrote:I'll measure up tomorrow for ya
thanks bloke

JEs
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
Top
Posts: 48
Joined: Mon Mar 14, 2005 6:52 am
Location: New Zealand

Contact:
Contact jafa

Post by jafa »

From front of crank pulley to the end of the 3 legged donut yoke thingy is 1355mm, note this is to the end of the yoke that is bolted to the output shaft, not to the rubber bit, mine has been taken off and is left with just the steel bit on the output shaft
'85 Hilux 3rz, duals, 4.7's,6stud histeer,Racerunners up front, coils rear , 30spl longs, on 40" Iroks

[url=http://www.snr4x4.co.nz][size=200][color=red][i]SNR4x4[/i][/color][/size][/url]
Top
Posts: 2254
Joined: Tue Dec 10, 2002 5:09 pm
Location: Sydney

Contact:
Contact jessie928

Post by jessie928 »

jafa wrote:From front of crank pulley to the end of the 3 legged donut yoke thingy is 1355mm, note this is to the end of the yoke that is bolted to the output shaft, not to the rubber bit, mine has been taken off and is left with just the steel bit on the output shaft
sweeet, thanks man :D

Jes
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests