Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Moving a lpg tank

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 601
Joined: Mon Nov 15, 2004 6:52 pm
Location: North West Melbourne

Contact:
Contact dwaynes

Moving a lpg tank

Post by dwaynes »

Okay guys im in melbourne and need to see what it will cost to get my LPG tank raised 50mm to suit the body lift.
Any one have any ideas on who could do this oh and im in the west of Melbourne

The tank is where the standard petrol tank is on a GQ
www.mudrhino.com.au
Top
Posts: 1005
Joined: Sat Aug 02, 2003 8:34 am
Location: Croydon, Victoria

Post by TRobbo »

is it possible to fit spacers to the lpg tank cradle thereby lifting it in the same manner as a body lift.
Warn - Dont leave home without it
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Depends on how the tank is held either in a cradle or not, may just be able to remount the cradle higher or just make a new one that is shorter and positions the tank higher.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 601
Joined: Mon Nov 15, 2004 6:52 pm
Location: North West Melbourne

Contact:
Contact dwaynes

Post by dwaynes »

thought of that but the cradle is bolted to the bottom of the chassis not the top
www.mudrhino.com.au
Top
Posts: 2775
Joined: Thu Apr 13, 2006 8:59 pm
Location: Melbourne

Post by GQ Bear »

someone on here did it a while ago with pics. do a search

he moved tank to sit above, not below cross member. and then used spacers on the other side. something like that anyway

if you find the link can you post it as its something i was gunna do too but havent got around to yet
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Top
Posts: 601
Joined: Mon Nov 15, 2004 6:52 pm
Location: North West Melbourne

Contact:
Contact dwaynes

Post by dwaynes »

Well i hope someone else knows the link as i have just gone through 20 odd pages and got jack.
www.mudrhino.com.au
Top
Posts: 2775
Joined: Thu Apr 13, 2006 8:59 pm
Location: Melbourne

Post by GQ Bear »

http://carl.outerlimits4x4.com/viewtopi ... e+lpg+tank

no pics though :cry:
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Top
Posts: 601
Joined: Mon Nov 15, 2004 6:52 pm
Location: North West Melbourne

Contact:
Contact dwaynes

Post by dwaynes »

thankyou will look at it some more
www.mudrhino.com.au
Top
Posts: 1544
Joined: Tue Oct 22, 2002 8:37 am
Location: Performing booty fab in my Garage

Contact:
Contact Wooders

Post by Wooders »

If you find anything please post it up as I am looking to relocate my utes LPG tank under the tray...
Only problem is it's a big mutha, so I'm thinking of mounting it on the chassis rather then the tray itself (how it is now)....
and when I say big mutha think 180cm long & 60cm diameter.....
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests