Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Zook with lux diffs.. steering??
Zook with lux diffs.. steering??
Wat are u guys runnin that run lux diffs?? wpuld perfer something power and something that doesnt cost the earth?
Possibilities are endless. Alot of guys use an IFS hilux box and pump as it is fairly straightforward to set up. Ditto for vitara power steering (esp. if you are running a vit engine as the pump bolts straight on).
Personally Im going to use a pump from a Ford and a 75 series cruiser box and then just a straight flip arm conversion on the diff.
You can pretty much adapt anything to suit though.
Personally Im going to use a pump from a Ford and a 75 series cruiser box and then just a straight flip arm conversion on the diff.
You can pretty much adapt anything to suit though.
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Again, many ways to skin a cat.Aerenandmel wrote:what do you use for a drag link. is it custom made or is there one that fits length wise?
Im using heavy wall tube cut to size and tapped to accept 80 series rod ends. You can buy custom draglinks from Snake, Superior, M&M etc. etc.
Im getting an engineer to tap the tube for me. Dont want it screwed up.
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Are you asking about the steering box, steering links or the arm on the diff end?
Was setting my black car up with a crossover arm. Available through BBM 02 96799744
Steering box, you can use most; Vitara, Landcruiser 60-70 series, Toyota Cressida etc or even your factory one.
Steering links, you may be able to adapt factory links. On most of my cars i have aftermarket HD tie rod and drag links. Either through BBM, Superior or Cheezy racing. Aftermarket HD tie rods allow you to use the stronger 80 series rod ends with hilux diffs. The tapers are the same for both Hilux and 80 series but the 80 is much stronger.
Was setting my black car up with a crossover arm. Available through BBM 02 96799744
Steering box, you can use most; Vitara, Landcruiser 60-70 series, Toyota Cressida etc or even your factory one.
Steering links, you may be able to adapt factory links. On most of my cars i have aftermarket HD tie rod and drag links. Either through BBM, Superior or Cheezy racing. Aftermarket HD tie rods allow you to use the stronger 80 series rod ends with hilux diffs. The tapers are the same for both Hilux and 80 series but the 80 is much stronger.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Or use the landcruiser box, it's on the outside of the rail. Easier than moving the alternator.Red_Zook wrote:ray.. look at my old one.
doubble arm.
ifs lux box (i used zook but yea)
you know how it worked
u might just have to move the altinator!!
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Who is online
Users browsing this forum: No registered users and 1 guest